Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Jet Mini lathe

Posts

Jet Mini lathe

#1

Jet Mini lathe

Dave Peebles Lyons, Ohio!

>Greetings to all,

A couple of weeks ago my cousin's son contacted me about his interest in woodturning. We set up a time for him to visit and check out my lathes and shop.

He is a bright and talented kid of about 16 years of age. He told me that his high school still had a woodworking shop and that his teacher had been a big help to him.

After talking for a few minutes he told me he would like to buy a mini lathe to have at his place. So, I told him to take my mini to try and see if it would work out for him.

Well, to make a long story short.... or a little shorter :) He emailed me tonight to say he is looking to buy one. He feels that the Jet mini will work out very well for him.

Soooo, I an seeking the collective wisdom of the group to find the best price you have seen lately for the Jet mini. Money is a big thing to a 16 year old, and I would like to find the best price for him. I have already told him that he can use mine as long as he would like to, but he would like to have his own.

Thanks for any info on any deals you may have run across lately. He is not looking for the variable speed, just the old belt change model.

Thanks,

Dave

Re: Jet Mini lathe

#2

Re: Jet Mini lathe

Gordon Seto

>Dave,

Amazon used to have a one day sale at super low price randomly or special $50 ~ $100 gift cards for over $299 in the past. He can wait while using your mini in the mean time. I suggest he should also consider Jet 1220 as well; and see which model comes on sale first.

Gordon

Re: Jet Mini lathe

#3

Re: Jet Mini lathe

john lucas

>Dave I've only bought large lathes from them but get a quote from www.toolnut.com He has always been lower than anyone else and offers free shipping. I don't know if he carries the mini but it would be worth it to check it out.

I would also check and see what Woodcraft is selling the Rikon mini for. Sometimes they have an awfully good deal on those and they are very similar to the jet.

Re: Jet Mini lathe

#4

Re: Jet Mini lathe

Gordon Seto

>I think the Rikon may have some durability problem.

Last year Russ posted that he had 6 mini lathes in his studio; 3 were Jet and 3 were Rikon. The Rikons were falling apart while the Jet were holding up.

I also saw a post somewhere, the Woodcraft is not yet 6 months old and the Rikons that were used in the classes are having problems. Granted, students don't treat equipment in classes as if their own. While new, Woodcraft gives excellent service. I don't know how well the service from Rikon; but we already know Jet has been real good.

Gordon

Re: Jet Mini lathe

#5

Re: Jet Mini lathe

john lucas

>Gordon I just checked with our two local woodcraft stores on the reliability of the Rikon because they use them in their demo rooms. Both told me they have been holding up fine. I guess you can only go with what you hear. We do know the Jet is a good performer with the only consistent problems being the tool rest and the VS motors.

Re: Jet Mini lathe

#6

Re: Jet Mini lathe

JKJ in East TN

>>I have already told him that he can use mine as

>long as he would like to, but he would like to have his own.

Dave,

He may be "bright and talanted", but he sounds like a typical "I've got to have it now" 16 year old! (I was that way until I grew out of it at about 50 :)

As we know it would be good for him in many ways to try the lathe before buying (including building patience), maybe you can convince him to do so with a little incentive, perhaps offer to provide a gouge or two or a used chuck and/or some personal lessons.

As for the best deal, I bought one just to carry around. I talked with my local dealer and ended up buying at a small percentage over cost which was significantly under the usual selling price. (big markup on these?) If you have a friendly local dealer that you've been supporting for years, you might chat with him and see what they can do. He could save money by using a worktable or making a stand and purchase the Jet stand later.

JKJ

Re: Jet Mini lathe

#7

Re: Jet Mini lathe

Bruce Wiseman

>Hey Dave,

I don't want to start a range war, but actually there isn't much of a mark up on the iron. Stores hope you will buy tools, chucks, etc. which does have a good profit margin. Maybe look for a used one? I know the local Woodcraft here sold their class room lathes at a good price because they were changing them out. Contact them or Rockler to see, even if it isn't at their store they may know of another that is within driving distance that has one. Personally I would stay away from the VS model. As always you mileage may vary. Good luck!

Bruce

Re: Jet Mini lathe

#8

Re: Jet Mini lathe

Robert Henderson

>Watch your local craig's list. I see Jet lathes show up on a regular basis (although not as frequently as radial arm saws).

Re: Jet Mini lathe

#9

Rob Wallace

Re: Jet Mini lathe

Rob Wallace

>John Lucas wrote:

"Gordon I just checked with our two local woodcraft stores on the reliability of the Rikon because they use them in their demo rooms. Both told me they have been holding up fine."

What else would you expect Woodcraft to tell you about these lathes? I don't consider this a fair an impartial evaluation or recommendation at all, John! This is kind of like the cholesterol reducing research on oatmeal being funded by the oatmeal companies!!

I own both a Jet mini (NOT the VS version) and the Delta Midi (LA200), [as well as a Jet 1642 2 HP] - I can tell you that I would recommend the Jet over the Delta if this one is among the mini-lathes being considered. I can elaborate if interested, but I have recommended the Jet mini to many new turners over the past few years, and as far as I know, none have been disappointed...

Rob Wallace

Re: Jet Mini lathe

#10

Re: Jet Mini lathe

Dave Peebles Lyons, Ohio!

>Thanks Gordon,

I did give him that advise tonight. I still cannot find a place that has the 1220 for sale. Do you happen to have a link?

Thanks.

Dave

Re: Jet Mini lathe

#11

Thanks John

Dave Peebles Lyons, Ohio!

>Hi John,

Thanks for the imput. I would like to see him stick with the Jet mini. I have many hours on mine and feel it is a solid little lathe.

I do teach a beginners class at my local Woodcraft and there have been some issues with the Rikon. Not in my classes, but when I came in for my next class many of the lathes had stripped bolts on the bangos and tailstocks. I am not sure what happened, but I suspect that the students in the previous class had been a little heavy handed with them. I was not able to talk to the instructor of the class, so I am unsure about what really went on. But I feel I can only recommend what I have used over a period of time.

Best wishes,

Dave

Re: Jet Mini lathe

#12

Hi John

Dave Peebles Lyons, Ohio!

>I agree 100%,

I did give him one of my favorite gouges to use with the lathe. But he lives about two hours away, so lessons would be tough for him to do.

I emailed him tonight and told him to keep the lathe as long as he wants. And advised him to wait for the best deal.

Thanks,

Dave

Re: Jet Mini lathe

#13

Hi Bruce

Dave Peebles Lyons, Ohio!

>Thanks for the input,

No range war here, just collecting good info. I bought my mini a lifetime ago... or so it seems. So I am really out of the loop on pricing. My local Woodcraft is so new that I know they won't be selling any of the lathes soon.

Thanks and best wishes,

Dave

Re: Jet Mini lathe

#14

Thanks Robert... will do

Dave Peebles Lyons, Ohio!

>

Re: Jet Mini lathe

#15

Thanks to all

Dave Peebles Lyons, Ohio!

>I just wanted to take a moment to thank all who responded to my question on the Jet lathe.

Your thoughts have given me some solid info to think about.

Best wishes,

Dave

Re: Jet Mini lathe

#16

TEK of NCWT has one *LINK*

Gordon Seto

>Dave,

Tom Knapp (TEK), the President of NCWT Club has one. He is a regular here. Hope he will chime in.

He may be helping his son moving to VA now. you can email him.

Gordon


TEK review on JET 1220