Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Ed Kelle demos

Posts

Ed Kelle demos

#1

Ed Kelle demos

GaryG in MD

>It was a great pleasure to meet our own Ed Kelle at his demo for the Capital Area Woodturners in Alexandria, Virginia last Saturday. Ed showed us quite a bit about texturing and coloring. It was very informative, and Ed's low-key but detail-oriented style was very relaxing. Ed is the kind of guy you feel like you've known for a long time -- even if you haven't.

For anyone who is, or can be, near Rockville, MD on the evening of September 6, Ed will be coming back down to demo turning his blossom form for the Montgomery County Woodturners (see www.montgomerycountywoodturners.org for directions, etc.) I highly recommend that you come if you can. Visitors and guests are very welcome.

With this message, I will begin a series of eight photos from Saturday's CAW demo to show you what Ed is doing, if you aren't familiar with it. If you want to see more, his web site is www.kellewoodturning.com.

This first image shows Ed opening a small box highly textured on the outside but smooth and shiny on the inside -- a very nice contrast.

Thanks Ed. Looking forward to seeing you next month.

...Gary


img

Re: Ed Kelle demos

#2

second photo

GaryG in MD

>Here is an assortment of some of the things Ed brought down to show us. Note the wide range of texturing and coloring.


img

Re: Ed Kelle demos

#3

third photo

GaryG in MD

>Here is one of Ed's signature pieces -- his coral platter. Wow.


img

Re: Ed Kelle demos

#4

fourth photo

GaryG in MD

>Here is Ed doing some linear texturing with a Dremel and a diamond-coated cutoff wheel. Very effective.


img

Re: Ed Kelle demos

#5

fifth photo

GaryG in MD

>This shows Ed doing some other texturing, but I include it because of the other things you can see on the table -- his paints, a large natural coral box, a blossom form, and his green gourd. Lots of innovation going on here.


img

Re: Ed Kelle demos

#6

sixth photo

GaryG in MD

>Count the holes! Man this takes patience, but the final result is wonderful.


img

Re: Ed Kelle demos

#7

Sand socks!

Carole Valentine

>That will solve my problem! Thanks for showing us these Gary and Ed. I sure wish I could make it up there. Ed, I have admired your work for a long time.

Re: Ed Kelle demos

#8

seventh photo

GaryG in MD

>Ed began his career as an air-brush artist, and a very good one from the evidence of some of the images he showed us. But we're happy he moved into wood turning! It's not all texture and color with Ed -- note the size of the hole in his HF. (This was not hollowed from the bottom!) That's a fine form. Ed points out that no matter how much texturing and carving you're going to do, you have to start by turning a good form. Here, he applies some transparent color. The wood grain shows through a series of washes applied to yield a gradation in color from light to dark.


img

Re: Ed Kelle demos

#9

Re: Ed Kelle demos

Jim Shaver - Oakville, Ontario

>Outstanding,

Ed is a very classy man, patient and always willing to share...I am glad to see him doing so well.

take care,

Jim

Re: Ed Kelle demos

#10

and finally...

GaryG in MD

>Just a cute little colorful grouping. That was a great demo.

Thanks to WC's 'Eliot d', our MCW Program Director, who met Ed at the Yankee Symposium and suggested that he come down to visit. For you other club program directors out there, I can tell you that Ed is interested in doing more.

Way to go Ed. See you soon, Gary


img

Re: Ed Kelle demos

#11

Re: Ed Kelle demos

Ron in Drums PA

>Thanks for sharing that Gary.

Ed, I'd like to go to one of your demo. From the photos it looks like you did a great job.

Re: Ed Kelle demos

#12

Re:Thank you guys- some very.....

Jamie Donaldson

>......interesting and innovative work there. So many good ideas, and so little time!!!! :-((((

Re: Ed Kelle demos

#13

A Singing Demonstrator!

Jennifer@Indy.USA

>Nice shots Gary. Wish you were coming closer to this area Ed. By the way, I didn't know you sang opera :)

Every part of your demo looks interesting. I'd love to see it. Keep up the fantastic work!

Jen

Re: Ed Kelle demos

#14

Ed Kelle will Demo in Delaware Sept 5

Gerry Meekins

>Gary,

Thanks for the great photo's of Ed's Demo. Ed said he had a great time with you folks.

Ed will also be doing a Demo at the Wilmington,Delaware Woodcraft store on Wednesday, September 5th from 7pm to 9pm. First State Woodturners will be hosting this event.

Gerry

Re: Ed Kelle demos

#15

Re: seventh photo

Molly Winton

>Gary these are great photos thanks! Ed is SO right about the primary element being form. I also emphasize this. NO surface enhancement will improve poor form. Super series Gary. Wish I could have been there. I love Ed's work, and know I would learn a lot.

Re: Ed Kelle demos

#16

Re: seventh photo

Ed Karch

>I was able to spend the day with Ed in the workshop he did for CAW. It is well worth your time to find out when he does another and GO. I was able to do two pieces that I will post as soon as I wakeup and shoot some photos.

Re: Ed Kelle demos

#17

Re: and finally...

Ed Kelle

>Gary

Thanks for all the great pics, I had no idea you were shooting so many, they look fantastic.

I had a great time down there and really enjoyed spending time with everyone. I hope they enjoyed the sessions as much as I enjoyed teaching, I really love teaching.

Thanks to my wonderful hosts- Eliot and Claudia Feldman in Bethesda, and Mark and Jennifer Wollschlager in Alexandria. They all made me feel at home.

Looking forward to getting back down that way in a few weeks, time is going to fly by before i know it.

Thanks again and I hope you enjoyed the sessions

E

Re: Ed Kelle demos

#18

Re: Sand socks!

Ed Kelle

>Thank you Carole, congrats on the profile in WTD, your work is great!

To make the socks, put 2 layers of grocery produce bags inside each other, put in some sand, not totally full, slide it into a long tube sock and continue filling, then knot the bags, knot the sock and slid it into a second sock and knot. Perfect for support both for your work and also your hands. And the socks will not scratch your pieces so you can sign the bottoms without worry. I have 4 of them I've been using for ages since I did stone sculpture.

Re: Ed Kelle demos

#19

lyrics... OOOOOOO my hands hurt..... ;)

Ed Kelle

>

Re: Ed Kelle demos

#20

Thank you all

Ed Kelle

>for your kind words. I had a great time teaching I hope that what I shared will encourage others to explore and have fun. Woodturners are a fantastic group of people and I am happy to have found my way into this art form. Meeting new people and making friends around the world are the most important part of what we do and I am grateful for all the forums that allow us to do so.

Happy turning!

E

Re: Ed Kelle demos

#21

Re: and finally...

charlie belden

>Great set of photos providing ideas and inspiration. Thank you sir.

A friend who is a fourth generation briar pipe

maker has an old machine he calls a coral cutter - two flat spear point "drills", set about 20 degrees apart which rotate and alternate making contact with the wood , the distance between contact points can be varied, as can

the speed. The resulting surface has conical

rather than hemispherical depressions which

look like the surface of some corals. Coral cutting with this machine is hand held and very fast.

Will try and find the tool maker and possible

availability if you're interested in it.

charlie b