Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Teak oil?

Posts

Teak oil?

#1

Teak oil?

Carol in Illinois

>Hey, gang, do any of you use Teak Oil on turnings?

I ran across some in a marine shop, obviously meant for care and feeding of boatwood. I keep searching for yet another experiment, and wondered if y'all had tried this. How is Teak Oil different from, for example, Tung Oil?

TIA

Carol

Re: Teak oil?

#2

Re: Teak oil?

RonZ

>If I'm not mistakened, teak absorbs the oil and needs to be replenished when the oil dries up, usually for inside use. Tung oil and its derivitives develop a build that seals off the wood.

Re: Teak oil?

#3

Re: Teak oil?

Brian Hahn in SW Wisconsin

>Teak oil usually contains tung oil.

Re: Teak oil?

#4

George Balock

Re: Teak oil?

George Balock

>Carol,

I've used teak oil with good results on exotics. It doesn't yellow and darken as much as Watco or Waterlox. Here is a pic of a cocbolo box finished with teak oil and buffed.

George


img

Re: Teak oil?

#5

Re: Teak oil?

John Veerkamp

>I have used teak oil on some turnings. It is thinner than most "tung oil" mixes. It is usually a mixture that contains uv inhibitors and designed for exposed surfaces like boats and decks. It doesn't build much, but seems to work well for popping grain.

John

Re: Teak oil?

#6

Re: Teak oil?

Russ Fairfield

>Teak Oil can be many things, but it is essentially no different from any other oil finish except it is packaged in a different can with a higher price. Some manufacturers add some color to their Teak Oil to compensate for the bleaching of the wood from exposure to salt air and sunlight, and some might add a UV agent.

Re: Teak oil?

#7

Re: Teak oil?

Wally Dickerman in Arizona

>Back in my boating days I had a boat that had lots of teak. Decks, rails, trim and more. I've applied gallons of Daly's SeaFin teak oil. At least once a year to all of it. It's actually tung oil plus UV, plus more. Meant for outdoor use. I wouldn't use it on a bowl or vessel, although you could.

I made sure that my next, and last, boat had fiberglass decks. It did have teak rails and trim, but I used top grade marine varnish instead of oil. Still had to apply a couple of coats once a year. It was a 45 footer so there was still quite a bit of teak. When I retired we sold our house and lived on it for awhile. Cruised between Puget Sound and Alaska every summer. (No, I didn't have a lathe aboard)

Wally

Re: Teak oil?

#8

Thanks all. Will proceed w/ experiment!

Carol in Illinois

>