Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Sorry Dick Hines

Posts

Sorry Dick Hines

#1

Sorry Dick Hines

Mike Hamilton

>But my turn to gloat. Today was delivery on my new lathe.

Regards,

Mike Hamilton

Plainfield


img

Re: Sorry Dick Hines

#2

Re: Nicely packaged

Mike Hamilton

>A pretty secure and compact package.


img

Re: Sorry Dick Hines

#3

Re: Shoulda bought stock in WMH

Mike Hamilton

>64 is as slow as it goes w/o load.


img

Re: Sorry Dick Hines

#4

:)

Jennifer@Indy.USA

>I'm grinning ear to ear for you Mike!

Yippie!

Jen :)

Re: Sorry Dick Hines

#5

Re: Sorry Dick Hines

Terry Quiram, Roanoke Illinois

>Congratulations on your new lathe. Got mine yesterday and still grinning.

Terry

Re: Sorry Dick Hines

#6

Dick Hines

Re: :)

Dick Hines

>Mike , I have a lathe, infact I have two. The trouble is I have no power in the shop. Working on the proublem though.

Re: Sorry Dick Hines

#7

Ain't it fun-That's southern for "Cool"

john lucas

>

Re: Sorry Dick Hines

#8

Re: not meaning to be a smart a$$

mike hamilton

>I feel for you. I give electricity a wide berth. Don't understand it, lots of respect for it, pay someone else to mess with it.

Good luck,

Mike

Re: Sorry Dick Hines

#9

Re: Sorry Dick Hines

Steve Russell

>Hello Mike,

Congratulations on the arrival of your new baby and thanks for passing out the cigars... :-) Seeing your unpacking photos reminded me of my days as a demonstrator with The Woodworking Shows. I demonstrated on Jet 1642's (both the 110V and the 220V models) for about two of the five years I demonstrated at the shows.

Just before the show every week, I got a brand new lathe to unpack and setup. I was like a kid at Christmas, even though the lathes were not mine to keep and were usually sold after the show was over. It was still sort of fun to bust the straps on the boxes and set them up every week though... I probably have more experience setting up a 1642 than most of the folks at Jet, not to mention most of their sales reps... :-)

My 1642 demo lathe arrived very late at some shows due to shipping delays, requiring a mad dash to get it up and running (sometimes in 30 minutes or less) before the show opened, so I could start my demo on time. :-) I recall one show where the lathe was so late arriving, that I did not even have time to clean all of the gunk and oil off the lathe before I had to start the demo. :-o

Then there was the show where we had no electrical power in my booth and I held up a bowl blank and gave the bowl turning demo anyway. Or another one where the electrical power dropped a leg and fried my variable speed controller right before a demo! I completed that demo using a Jet mini lathe... Oh, the stories I could tell! Those were the days... Thanks for the stroll down memory lane and best wishes to you and yours!

Steve Russell

EWW, WVP

The Woodlands, Texas

Re: Sorry Dick Hines

#10

Re: Congrats. Still need help making it mobile?

Al Crandall (N.E. of Indy)

>Call me or email me if I can help.

Re: Sorry Dick Hines

#11

Re: Congrats. Still need help making it mobile?

mike hamilton

>Thanks. Definitely on my mind. Torn between the John Lucas arrangement and something more along the lines of the club lathe. Had been planning to bring this up Sunday in person.

Mike

Re: Sorry Dick Hines

#12

Re: Thanks all

mike hamilton

>

Re: Sorry Dick Hines

#13

Dick Hines

Re: not meaning to be a smart a$$

Dick Hines

>I know your weren't. If it was not so hot I would dig it up and replace it my self. I wired the shop when I had the house built. The contractor put the power panel in the shop and I did the rest.

I don't mine working with power. You just work with one hnad in your pocket.LOL