Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

First use of new chain saw

Posts

First use of new chain saw

#1

First use of new chain saw

Stuart Johnson

>My old saw is a 22 year old Craftsman with an 18" bar. The manual doesn't say the hp but I think it is 39cc. I've cut a lot of wood with the saw and from day one is has been hard work. I've been toying with the idea of a new saw for sometime and after spending close to 2 hours trying to get it to start decided now was the time.

Yesterday I bought a Stihl MS361. Today I filled up and after a few tugs to get things primed the first time it fired right up. I let it idle while I set a nice sized piece of Mesquite up on my sawing stand. The ends needed to be cut off and then the log split for blanks. I proceeded to cut the end off the log plus cut my stand in half. I didn't just cut into it I went straight through it. There was no downward pressure required like with the Craftsman.

I doubt if I'll ever wake up and think oh boy I get to go chain sawing today. But, I can see where using a good chain saw take away the dread.

By the way when I put the new saw away I thought I would give the old one another try. It fired on the first pull. I'll save it for when I have to cut brush out of the ditches.

Re: First use of new chain saw

#2

Stuart, I'm laughing my ....

Ed Moore

>fanny off at you going through the stand with your new saw. Do you feel like Tim Allen on TV? Power is fun.

Go ahead, blame me. [grin]

Ed

Re: First use of new chain saw

#3

Re: First use of new chain saw

RonZ

>It's great having a good tool for the job. To be fair to the Craftsman, try a new blade on it. I did that for my electric chain saw. When I saw my gas one was putting it to shame I was ready to boot it out. I changed the chain to a new Stihl one and it was fine.

Re: First use of new chain saw

#4

What a laugh!

Dave Belser

>I had the chance to use an MS361 - boy is that one nice saw. As for first time you fire it up stories, I've got a great one (not to hi-jack your thread) When I bought my Jet dust collector (the big 220 one) I got home and put it together and fired it up. I played with the end of the 4" hose testing the and admiring the suction. I then thought "gee better suck up some dust". So I started vacuuming the chips off of my work table - whoosh whoosh whoosh - Ooops! there goes the remote control for the DC right up the hose. I got to listen to it rattle up the hose followed by the inevitable crunching as it hit the impeller.

If I hadn't been laughing so hard at my stupidity, I think I would have been much more angry!

Congrats on the new saw.

- Dave

Re: First use of new chain saw

#5

Re: What a laugh!

john lucas

>Dave you brought back funny memories. I was cleaning my shop one day and sucked up the DC remote. I dove for the hose and stood on it. Then I had to try and figure out how to turn the DC off without getting off the hose. Finally managed to crimp the hose and drag it to the wall where I pulled out the plug. Glad now one has video's in our shop.

Re: First use of new chain saw

#6

Re: What a laugh!

Dave Belser

>John, if I'd been thinking quicker I could have stalled the air flow by holding it flat against the table - that's the funny part, that I stood there and listened in astonishment as it rattled it's way to the impeller. Now I have my shop plumbed for DC and it takes a lot longer for wayward stuff to reach the impeller.

Glad to know I'm not the only one. But I still think it takes the cake, it was literally the first thing I sucked up with the DC.

- Dave

Re: First use of new chain saw

#7

Re: What a laugh!

john lucas

>Dave I also sucked up my turning smock one day but managed to grab the last inch before it went all the way up the hose. Maybe you and I should install a screeen in the hose.

Re: First use of new chain saw

#8

Re: First use of new chain saw

Barry Turner

>Stuart, you've got one fine chainsaw! I've had the exact same model for two (2) years and there ain't no way I'm going back to McCullock/Poulan/Homelite/Craftsman saws. There is no comparison. Mine cuts so good, it's scary. On that note, chainsaws aren't at all particular about what they cut....wood or leg.....it don't matter to the saw. Be careful with that thing.