Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Corn Cob Pen Help

Posts

Corn Cob Pen Help

#1

Corn Cob Pen Help

C.W.Stivison

>I need to make a corn cob pen for a friend as a gift. I have only made a couple pens in my short turning life and none have been with cobs. I have ordered cobs and bushings and some larger pen kits. My question is what is the best finish to use on them, how fine do I need to sand, and any other information a rookie needs to know.

Thanks

CW

Re: Corn Cob Pen Help

#2

Re: Corn Cob Pen Help

RonZ

>Your best bet is to pay extra and get them stabilized. It makes it easier to finish. You can use friction polish or melamine for a natural feel or CA glue to fill the gaps and use as a finish.

Re: Corn Cob Pen Help

#3

Re: Corn Cob Pen Help

C.W.Stivison

>Thanks Ron,

I did order stabilized blanks.

CW

Re: Corn Cob Pen Help

#4

Re: Corn Cob Pen Help

RevDoug

>Use a CA finish. With cobs, it's the only way to do. You'll want to sand the finish to a glass smooth surface with micromesh and then you can use plastic polish to buff it up with.

Turn 'em round,

Re: Corn Cob Pen Help

#5

Re: Corn Cob Pen Help

Joe Herrmann

>Emory McLaughlin wrote an article for Woodturning Design on making Corn Cob pens. It was quite detailed and informative and might be a good resource for you. It's in Issue #7, Fall, 2005.

Joe

Re: Corn Cob Pen Help

#6

Re: Corn Cob Pen Help

RonZ

>There is no 'only' way to do things. There are ways that have proven themselves through time though.

Here's a picture of one with a friction polish finish. My customers like the natural feel and the patina it develops over time. Since I do this for a living, CA takes more time and more money, something I have to minimize in order to stay in business. Not to mention the mess.


img

Re: Corn Cob Pen Help

#7

Re: Corn Cob Pen Help

RevDoug

>Bad choice of words I used when I said "only." However, I can get a cigar style cob pen turned, sanded, and finished in about 15-20 minutes with no mess. Since I'm starting with raw cobs, CA is the best way I've come up with to fill the pockets, and finish without taking more time and products.

Turn 'em round,

Re: Corn Cob Pen Help

#8

Re: Corn Cob Pen Help

RonZ

>You are correct though, I do use CA on raw cobs that's why I asked what he was using. With sanding sealer and friction polish on a stabalized blank I get a Polaris turned, sanded, and finished in about five minutes.