Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Source for Sanding Mandrels/disks

Posts

Source for Sanding Mandrels/disks

#1

Source for Sanding Mandrels/disks

Barry Irby

>I'm looking for 2 and 3" sanding mandrels or pads or disks. I want them with Hook and Loop and with Hex shafts with the cove around them that allows for snap in and snap out. And of course, I want them cheap.

What I want to do is set up about six of them in a little rack, one for each grit and then use a quick connect on my drill and switch mandrels rather than switching disks of sand paper. This would do several things. I think the H&L would last longer because it would get to cool off and because you would change the sand paper less often. Anybody got a better Idea?

Re: Source for Sanding Mandrels/disks

#2

Steven Antonucci

Some ideas

steve antonucci

>First, I just order some mandrels from Enco (they were dirt cheap). Not specifically woodturning mandrels, nor to your spec, but you might want to look around use-enco.com.

Secondly, I've never had an issue with the H&L wearing out on sandpapaer before the abrasive? I'm getting better about tossing "bad paper", and the backs still look great. Fronts are shot.

Steve

Re: Source for Sanding Mandrels/disks

#3

Re: Source for Sanding Mandrels/disks

Vince

>Hi Barry,

I currently have a sale on my mandrels. Let me know if I can answer any of your questions.

www.VincesWoodNWonders.com

Vince

Re: Source for Sanding Mandrels/disks

#4

Re: Some ideas

JKJ in East TN

>>I've never had an issue with the H&L wearing

>out on sandpapaer before the abrasive

I suspect he means the hooks on the mandrel go, not the loops on the back of the sandpaper. If overheated, the hooks are distorted and quit holding.

JKJ