Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Hunter tool modifications

Posts

Hunter tool modifications

#1

Hunter tool modifications

john lucas

>I've been playing with the #1 hunter tool cutter. I'm making some tools to hollow christmas ornaments and probably other small things like boxes and hollow vessels. I'll try to post some photos tomorrow. I'm playing with the shapes of the bar to hold them and with the angle of the cutter. The first one worked excellent for hollowing something you won't see inside. I feel like I needed to increase the angle of the tool to make the surface smoother. These cutters cut so clean when used at the proper angle and proper feed rate that it would be really great if I can get find a tool bar shape that will allow you to reach all parts of the vessel with just one tool and still get that smooth cut.

Just wanted to wet your appetite.

Re: Hunter tool modifications

#2

Re: Hunter tool modifications

John Scheideman

>My appetite is as wet as it gets! I can't wait to see your photos. Thanks for posting. I'm toying with the idea of trying to make an adapter for the large Hunter cutter that I can put on the Stewart tool.

John

Re: Hunter tool modifications

#3

Re: Hunter tool modifications

Doug Thompson near Cleveland

>This could be good. If I could help in any way just ask.

Re: Hunter tool modifications

#4

Re: Hunter tool modifications

Norm Smith in Nova Scotia

>John, My appetite is wet also. I believe it is the hunter tool that came with my Elbo Tool but I haven't had time to play with that part. However I have used the Elbo tool with different attachments and love it so far.

I too am looking forward to your results.

Jeessss man, I think that it is great that you have the ability to make your own tools.

Norm

Re: Hunter tool modifications

#5

Re: Hunter tool modifications

john lucas

>Norm It all started many years ago when I ground a screwdriver to make a specialized scraper. I still that tool today although the tip is a bit shorter. With the purchase of a Mill/drill combo machine I have greatly improved my tool making capabilities. I'm not even in the Ball Park with Doug Thompson or Mike Hunter but sure do appreciate what they are doing for us.

Re: Hunter tool modifications

#6

Re: "Whet", not "wet"

Russ Fairfield

>As in sharpen. Just your English lesson for today. (smile)

Re: Hunter tool modifications

#7

Re: Hunter tool modifications

Doug Thompson near Cleveland

>John, please don't even think like that... first the idea needs to proven, it doesn't matter how it looks. If you want to offer to the public then you refine the appearance.

If you want to play around with CPM 10V I'll send some to you. Mill it then send it back and I'll have it heat treated. It won't cost you anything. I know how you love woodturning and your willing to try different ideas so go for it.

Re: Hunter tool modifications

#8

"Lucas Tool" has a nice ring to it

Doug Thompson near Cleveland

>A batch will be sent to be heat treated in a week or so then about 5 weeks after that another will be sent. A "Lucas Tool" might be in the future I hope... we all need more tools!

I milled some steel for Steve Worcester with a interesting idea, the Skaggs/Grunke tool is done and other different ideas. When mark Goodall returns from vacation the skew/scrapers and some other tools will be on the web site.

Let me know,

Doug 440.241.6360

Re: Hunter tool modifications

#9

Re: Hey, you guys need to slow down

Russ Fairfield

>Hey, you guys need to slow down with the new tools. You are getting worse that the computer industry with something new every day. The Thompson Tool I bought at the Symposium only a month ago is already obsolete.

One thing I did notice at the AAW Symposium was the proliferation of new turning tools. There were so many that I was only confused, when you should have been impressing me.

If every new tool were to live up to its claim, I will soon be able to turn 1000 biowls a day without ever turning on the lathe or using the grinder.

Re: Hunter tool modifications

#10

Re: Hunter tool modifications

eliot d

>I don't know if I'm on the right track for you, but , at the Yankee Symposium in Middletown, CT a few months back, Lyle Jameison(sp?) was selling a small circular carbide hollowing cutter that was set up in something like a small version of the Stewart swivel disk. I believe it was about $70. The idea was that it could be moved to nearly any angle and was small. Lyle made much of it being small ( perhaps 1/4 " dia). I believe his point was that a small cutter would make for a more efficient cut in that the same force would be applied over a smaller edge thereby creating much more pressure. (My own opinion is that one could take this theory too far, but that's another story.) I'm sure you could contact him and ask about it.

Re: Hunter tool modifications

#11

Re: Hey, you guys need to slow down

eliot d

>I think you hit the nail on the head! I spent three days with David Ellsworth at one of his workshops. His hollowing tools are just sharp pieces of metal stuck onto the end of a metal stick that is stuck into a wooden stick. And he uses no lasers or constraining rigs. I use three rigs/lasers and a whole bunch of professionally-made hollowing tools, but my pieces don't look like his!

Re: Hunter tool modifications

#12

Re: Hunter tool modifications

eliot d

>Would you mind sharing exactly which mill/ drill combo you have? Do you also have a metal lathe? Wouldn't one be more or less necessary for the kind of machining your are doing?

Re: Hunter tool modifications

#13

Re: Hunter tool modifications

john lucas

>Eliot. I bought a used Smithy Mill/drill. I bought it mostly because I didn't have the space or money to buy and store seperate machines. I think if you have the room you would be much better off with seperate machines of higher quality.

One of my former students is also getting into machining and he bought seperate tools. He didn't spend a whole lot more than I did but got much higher quality gear. He has much more room however.

Re: Hunter tool modifications

#14

1000 bowls a day and no sharpening :)

john lucas

>

Re: Hunter tool modifications

#15

Re: Hunter tool modifications

Ralph Watts

>John,

I purchased the Hunter with a 3/16" round shank then stuck it into my J. Jordan hollowing tool(s). Works like a dream. You can rotate the cutter to shear cut or level it out for a very agressive cut. Also if you angle the whole tool (maybe 15 to 20 degrees down from centerline) (while the cutter is in the level position) it makes a nice scraping tool and is not so agressive. I'm still astounded as how smooth the cut is with these criters.

Regards, Ralph

Re: Hunter tool modifications

#16

Re: Hey, you guys need to slow down

Russ Fairfield

>Elliot,

Yours will look like Ellsworth's and you will not need the lasers after you have made 100's of them over the span of 20 years.

Re: Hunter tool modifications

#17

Re: Hunter tool modifications

John Scheideman

>Ralph,

I also bought the small Hunter adapter at the AAW Symposium and put it on my Stewart bar. I was interested in trying the same thing with the larger Hunter.

John

Re: Hunter tool modifications

#18

With that name, it needs a laser...

Craig Daymon

>...or "light" something. (Careful here, too close and that other Lucas guy will want a cut.)

Think you can make the tool pop out of a handle?

Good luck John.

-Craig

Re: Hunter tool modifications

#19

Re: Hunter tool modifications

john lucas

>Doug I only meant you guys are way ahead on the machinist skills. Probably others as well.

Re: Hunter tool modifications

#20

Re: "Lucas Tool" has a nice ring to it

john lucas

>I appreciate the offer. This tool isn't made in a way that would benefit from exotic metal, other than the cutter. I don't have a tool in mind at the present that would benefit from your metal. The tool I would design is just like your spindle gouges. I love em.

Re: Hunter tool modifications

#21

Steven Antonucci

That would be so sweet!

steve antonucci

>It could have a red anodize for days when you were on the Dark Side and Green/blue or purple for days when you were "feelin' good".

I'd buy one...

Steve

Re: Hunter tool modifications

#22

Re: Hey, you guys need to slow down

eliot d

>Right, but I don't have a enough decades left. I like your thought , though.

Re: Hunter tool modifications

#23

Re: Hey, you guys need to slow down

Jimiles-Charlotte, NC

>The most important tool you can have in your shop is your own ingenuity! With a little of this you can solve most woodturning dilemmas without fancy new tools.