Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

natural edge hollow form

Posts

natural edge hollow form

#1

natural edge hollow form

ryker acuna

>I got some buckeye burl from a friend. It is beautiful wood. Heres the question, I turned the log down to a 11"H x 10W hollow form. The problem is Im going to leave the burl on the top entrance hole and leave a big, big inclusion in the top half. The entrance hole is about 1.5" and about .5" of the entrance falls off to a hollow inclusion. So do I turn the peice down to have a solid top entrance hole and a big hole on the side or do I just go for it? Im just afraid when I get so far in Its all gonna explode or break off. So my question is has anyone got any techniques to make it easier or am I out of my range in difficulty. Thanks for all your expert advice.

You guys have helped me out before I really appreciate it.

Re: natural edge hollow form

#2

Can you post a pic?

TDaniel

>

Re: natural edge hollow form

#3

Re: natural edge hollow form

Mike Nelson

>Go for it, finish the outside the way you want it, seal it and wrap with wide blue painters tape then hollow. If you have a steady rest, that would help keep it together.

Re: natural edge hollow form

#4

Re: natural edge hollow form

John Veerkamp

>one technique that I use for pieces that have inclusions and faults that I want to keep is to wrap the outside off the form with black vinyl electrical tape. Be sure to stretch the tape tight. This will stabilize the faults and help to dampen vibrations. it peels off with no residue.

John

Re: natural edge hollow form

#5

Re: natural edge hollow form

JKJ in East TN

>>Im just afraid when I get so far in Its all gonna explode or break off.

I have a friend who has turned some large pieces of amazingly unstable wood. His technique is to turn and finish the outside first, then wrap the entire piece with reinforced strapping tape. The strapping tape holds the piece together while hollowing and finishing the inside.

Of course a layer of tape makes it more challenging to judge the wall thickness so unless the entire piece has enough voids so you can SEE the thickness, it might be easier to leave a thicker wall.

JKJ

Re: natural edge hollow form

#6

Re: natural edge hollow form

ryker acuna

>Thanks for all the response. Im just going to go for it. I think I will try the tape wrap and see how it goes. You cant learn if you dont try. Anyway I will try to post a pick but Im not a computer person so we will see how it goes. OH also I typed the wrong wood, it is burl box elder. My bad. Thanks again to all.

Re: natural edge hollow form

#7

Re: natural edge hollow form *LINK*

Darrell Feltmate

>Ryker

If I understand you correctly, you are chasing after something like this. It is in spruce burl that should be as soft as or softer than your boxelder burl. Go for it and let us know what happens.


img

Gallery page Around the Woods

Re: natural edge hollow form

#8

Re: natural edge hollow form

ryker acuna

>Yep, thats it Darrell. My inclusion is in the same spot but a bit bigger. Im going to give it a try and see if I can post the picture on here. Thanks for the help.