Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

In Praise of the Talon Chuck *LINK*

Posts

In Praise of the Talon Chuck *LINK*

#1

In Praise of the Talon Chuck *LINK*

Jennifer@Indy.USA

>When I bought my big General lathe nearly 6 years ago I also bought the Oneway Stronghold chuck and have used that exclusively for everything that I turn that needs a chuck. Over the past couple of years I've started turning smaller stuff and up until a couple of weeks ago had been longing for a smaller chuck. Well the Oneway Talon chuck found my shop and I just love it! I can't beleive I went this long using that big chuck. This one is the perfect size and will be so much more suitable to what I've been turning lately. I found a great deal on it through a place called Landing Crafts. They sell all sorts of turning, burning and carving stuff.

Jen


Landing Crafts

Re: In Praise of the Talon Chuck *LINK*

#2

Re: In Praise of the Talon Chuck

Allen Neighbors

>Congrats, Jen! Hope you turn a million pieces with it... are you keeping count? :)

I'm searching for a Nova Titan to compliment my 2 SN2s. It's a 5" and the largest chuck in the Teknatool line... and I thought the Oneway Talon was Oneway's largest chuck. Hmmm... learn something new everyday!

Thanks for posting.

Re: In Praise of the Talon Chuck *LINK*

#3

Re: In Praise of the Talon Chuck

tm

>i like mine too.

Re: In Praise of the Talon Chuck *LINK*

#4

Re: In Praise of the Talon Chuck

Mike Rubes, Apex, NC

>Hi Jennifer,

The day I bought my Jet Mini I also bought a Talon (5+ years ago) and it has never let me down. Every problem I've had with it has been "user error"!! :) I use that chuck on almost every piece I turn in some form or other, either as a screw chuck, 4 jaw, cole jaw, etc and I really love it. The accessory jaws that I have also work very well.

Thanks for the link, I'd not heard of that place.

Mike

Spinning with my Talon yesterday and today in Apex, NC!!

Re: In Praise of the Talon Chuck *LINK*

#5

Re: In Praise of the Talon Chuck

john lucas

>Jen I've been using the smaller Vicmarc for a long time. it is the same size as the Talon. I can't imagine needing a bigger chuck. I've turned up to 19" bowls and 24 " platters with this thing. Maybe if I turned more bit hollow forms but then I'd feel safer with a faceplate.

Re: In Praise of the Talon Chuck *LINK*

#6

smaller chucks

TDaniel

>ABout 90% of the time a 3.5" chuck is plenty big, especially if you have the bigger jaws for it. The bigger jaws for my Vicmarc are about half way between the regular and the big jaws for the big chuck. Practically everything I turn is with the expanding grip rather than the squeeze grip so I like the fit to be as close to a circle as possible. No matter what size lathe you buy your first chuck should be a smaller one unless you plan to do only big work.

Re: In Praise of the Talon Chuck *LINK*

#7

Re: In Praise of the Talon Chuck

Bill Neddow

>Allen, be very careful mixing chucks of different makes. Oneway is geared to close clockwise. Nova, I believe, is geared to close counter-clockwise. Nothing wrong with either of these approaches, but don't mix them or you will end up with a flying saucer in your shop.

Nova makes excellent chucks, we have them at our club because we bought a DVR lathe. I use them there for demonstrating, but always have to be VERY careful and not launch something into the crowd. The reason is that, at home, I have five Oneway chucks.

The Oneway Talon is probably all the chuck you will ever need. I regularly turn 18 inch bowls on mine, using the largest jaws. Lots of strength. However, I do use the Strongholds for the really big bowls.

Re: In Praise of the Talon Chuck *LINK*

#8

See, I Told You!

Jim Shaver - Oakville, Ontario

>Hi Jen,

It's about time, I told you how much I Love my Talon chuck. I have mine set up with several jaw sets as well, I use it for many turning projects. I use it mostly for holding pen blanks when I drill them on the lathe, also for turning pepper mills, lidded boxes and also holding blanks when I turn drawer pulls and other spindle projects.

I too have a Stronghold and probably have not used it in two years.

The Talon is very versitile and I could not imagine not having one.

Take care,

Jim

Re: In Praise of the Talon Chuck *LINK*

#9

talon will do almost anything.rarely use stronghol

robert davis

>

Re: In Praise of the Talon Chuck *LINK*

#10

Mike Stafford

Re: In Praise of the Talon Chuck

Mike Stafford

>I have several Teknatool chucks from the original Nova, the Supernova and some SNII's. They have very adequately served my purposes. Since I primarily turn small I see no need for a monster chuck. I do like the Teknatool chucks since all of their jaws are compatible with all their chucks. One size fits all....

Enjoy!!!

Re: In Praise of the Talon Chuck *LINK*

#11

What about Axminster? *LINK*

Craig Daymon

>I have a Talon and a Stronghold and they are both great chucks, but I've heard very good things about Axminster chucks. ALL of their chucks can use the same jaws and they have a bigger selection of jaws than anyone else. (Including the O'Donnell jaws.) I spoke with several european turners at the Louisville symposium and they said the Axminsters are top-quality chucks but they are hard to come by in the US.

They make what looks like a great little keyed chuck with a very minimal profile.

-Craig


Axminster small keyed chuck - Craft Supplies

Re: In Praise of the Talon Chuck *LINK*

#12

A little caution

Bill Howatt

>I also have Oneway Strongholds and Talons and love them too. Many people do use the Talons for pieces larger than Oneway recommends with great success. My caution is that if you compare the metal in the Stronghold to the metal in the Talon it is obvious that extreme tightening to better, in the mind of the turner, hold large pieces may damage the Talon by deforming it. There is no reason to excessively tighten but I bet most think more is better.

Bill

Re: In Praise of the Talon Chuck *LINK*

#13

Re: What about Axminster?

john lucas

>I like the Axminster chucks. Haven't owned one however. I did find out that Vicmarc has huge number of different jaw shapes. The vic rep said that for some reason the US just doesn't bring them in. I bought a 3" set of jaws from him. I noticed that Craft Supplies now carries the 3 and 5" set now.

Re: In Praise of the Talon Chuck *LINK*

#14

Re: What about Axminster?

Craig Daymon

>I've been tempted to get the Axminster just to get the O'Donnell jaws. I also like the direct threading of the smaller Axminster. Looks like a lot less bulk than a Talon. I know there are a LOT more jaws for the Axminster than what Craft Supplies carries.

-Craig

Re: In Praise of the Talon Chuck *LINK*

#15

I really like both of my Talons

keith zimmerman, Normal IL

>

Re: In Praise of the Talon Chuck *LINK*

#16

Re: In Praise of the Talon Chuck

Bob Fawcett

>I have a Talon and a Stronghold.

I bought the Talon with my mini lathe. When I got the PM3520, I knew I needed a larger chuck. Turns out I was wrong. The Talon would have been fine for 99% of all I do.

I have both now, and use them all the time. I use them nearly interchangably. The only time I need to pick the right chuck is when I have something smaller than my stronghold jaws, or larger than my Talon jaws. Not very often.

Re: In Praise of the Talon Chuck *LINK*

#17

Re: Bill, I'm not going to mix...

Allen Neighbors

>chucks... I am looking for a Nova "Titan"... not a Oneway "Talon". I had the two Nova's before I bought my OW1640, or I'd probably have oneway chucks. But I want the Titan with the Powergrip Jaws. It took me a long time to remember which was Oneway's and which was Teknatool's. :)

I do see what you mean about launching one into the crowd. That'd be a catastrophe for sure!

Re: In Praise of the Talon Chuck *LINK*

#18

Re: In Praise of the Talon Chuck

WayneLeach-NW ONtario

>HI jen,

Thanks for the info on the link. I bookmarked it for when I am down in Georgia for the winter. Looks like good pricing?

Best regards from Canada,

Wayne

Re: In Praise of the Talon Chuck *LINK*

#19

Re: Bill, I'm not going to mix...

Barry Turner

>A friend of mine had a problem with excessive wear in the sockets where the Allen wrench fits on his SN2 chuck. I bought a straight Allen wrench to replace the ball-end one that came with my SN2. It seems to give a much more solid grip.....and no problems with excessive wear. At least not yet.

Re: In Praise of the Talon Chuck *LINK*

#20

Re: I hear you, Barry,

Allen Neighbors

>I cut the ball end off both of the T-handle keys that came with my SN2s, and they are just as easy ... maybe easier.... to use.