Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

1/8" Round nosed scraper? WTB

Posts

1/8" Round nosed scraper? WTB

#1

1/8" Round nosed scraper? WTB

Martin from Granbury

>I recently took a class with Chris Becksvoort at Kelly Mehler's. During the class, we had to make 1/2" diameter Shaker knobs for a clock. Kelly had a special tool (and Chris had one at home, too) that he used, and that I need to find. Kelly's tool was purchased from Rude Osolnik, who is no longer with us.

I have searched and searched, but the only ones even close are the "mini" tools that come in a set with 5 other useless tools. Also, I think I would prefer a full sized one.

So...if anyone knows where I can find a 1/8" Round nosed scraper, that I can buy individually, I would certainly appreciate it.

Thanks,

Martin

Re: 1/8" Round nosed scraper? WTB

#2

Re: 1/8" Round nosed scraper? WTB

Ron in Drums PA

>I would guess that the tool you saw was homemade. Not hard to do with some HSS or a cement nail inserted into a handle

Re: 1/8" Round nosed scraper? WTB

#3

Re: 1/8" Round nosed scraper? WTB

Walt Ahlgrim

>For small scrapers grab an old screwdriver and grind it to shape. May not hold an edge as long as high speed steel does. So what you sharpen more often if it ever gets too short grab another screwdriver.

Walta

Re: 1/8" Round nosed scraper? WTB

#4

Re: 1/8" Round nosed scraper? WTB

Chuck Engstrom

>You could buy 1/2" HSS tool bits (square) or HSS drill rod (round) from MSC or Enco or such to make your own. 1/8" tool bits, probably about 3" long, can't be much more than a dollar each, if they are even that much.

Best--

Chuck Engstrom

Re: 1/8" Round nosed scraper? WTB

#5

Grind a Thin Parting Tool

Jorge Castaneda

>Whe you need the parting tool you can grind it back...

Re: 1/8" Round nosed scraper? WTB

#6

Re: 1/8" Round nosed scraper? WTB

Scott Greaves in Blackfoot Idaho

>Hi Martin!

Yes you can make or modify tools to function as you need. But . . .

Ashley Iles makes the nicest little 1/8" round nose scraper you have ever used! It is a sweet little tool! You can get it at Tools For Working Wood.

Good Luck!

Scott.

Re: 1/8" Round nosed scraper? WTB

#7

Re: 1/8" Round nosed scraper? WTB

Martin from Granbury

>Thanks to Scott and all the others for their responses.

I would rather buy than make my own, due to time contraints, as well as not having much experience making metal stuff.

Scott, I searched the TFWW website, and I found a 3/16 RNS by itself, but the only 1/8 one I saw was part of a pricey 6 piece package. Did you buy one by itself?

I'll give Joel a call tomorrow and see if I can buy one without buying the entire set.

Thanks again, everyone.

Martin

Re: 1/8" Round nosed scraper? WTB

#8

Re: 1/8" Round nosed scraper? WTB

Scott Greaves in Blackfoot Idaho

>Hi Martin,

I cheated! ;-) I was doing a tool review on Ashley Iles small tools for More Woodturning (what was that Fred, almost two years ago?), And Tools For Working Wood sent me about four tools to try out. This round nosed scraper is one I picked, and they just sent it. Good luck on getting them to sell you one - I bet they will!

And in case you're wondering, my long term test results are that Ashley Iles tools are great! You won't find a much better tool! But of the ones I received, the skew is just a skew, and the gouge is just a gouge, but this little round nose scraper is the one tool that takes me places with my turning that no other tool I have does! If you do any fine detail work on a wood lathe (I am a penturner), this tool is a fabulous addition to your arsenal!

I hope this helps!

Scott.