Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Something for my little "Hermione"

Posts

Something for my little "Hermione"

#1

Steven Antonucci

Something for my little "Hermione"

steve antonucci

>My son was the original Harry Potter fan (actually, LOML was first...), but my daughter quickly caught up with her big brother.

As such, having spent this week at the beach, they will don Quidditch robes tonight and hit the local book store for the big Harry Potter "finale" book release at midnight. As such, my kids have the requisite magic wands from prior years, but I thought with my daughter Samantha's 6th birthday approaching rapidly that I would make something a little more "upscale" for her.

Backstory: 12 years ago, a month before my wife and I were married, we were walking the beach along 17 Mile Drive in San Luis Obispo, CA when I found some abalone shells in the sand. Neer knew what to do with them, but I packed them home.

Fast forward: I was inspired to make this wand today for my only daughter from a piece of ebony, a birdseye maple pen blank, and a small scrap of ebony. Originally, I tried 5 minute epoxy, but it failed and the three pieces came apart. I cleaned them up and reglued with CA and it held.

I used my hand as a steady rest and cut and sanded the final shape, but it still needed something. Then I remembered that I had the abalone shell, so I used a small razor knife to get a piece (being careful to not create a dust hazard). I ground the back flat on the side of my Tormek wheel, and CA glued it to a small tenon for the lathe. Then with a sharp spindle gouge, I cut the cabachon (1/4"x 1/8" thick), again being careful to not kick up dust. It was finished on the lathe with some 320/600/2000 G wet/dry paper and parted off with the razor saw. I spent 20 minutes on the floor looking for it in a pile of elm shavings before I found it and CA glued it in the bottom of the ebony.

Finish is 3 coats os $1 Minwax glossy, rubbed down a bit with mineral oil and beeswax.

This wand is certified to be the envy of the party tonight, since my wife immediately attempted to claim it as her own. Broke my heart to tell her it was for our daughter. When Samantha saw it, she nearly broke Dad's neck hugging me. (then she whacked mommy in the foot practicing her spells.

As always, comments welcome.

Steven


img

Re: Something for my little "Hermione"

#2

Re: Something for my little "Hermione"

Donna Banfield

>Boy Steve, I don't kids, but that story brought a tear to my eye. A very cool thing to do for your daughter.

Re: Something for my little "Hermione"

#3

Steve...what's the deal w/ abalone dust?

Michael Stadulis, in Gloucester County, NJ

>

Re: Something for my little "Hermione"

#4

So, do you want to know how the book ends?

Ron in Drums PA

>

Re: Something for my little "Hermione"

#5

I want to know About Abalone too, Great wand!

Barry Irby

>

Re: Something for my little "Hermione"

#6

That's a beauty that is...

Carol in Illinois

>bet she was proud as a phoenix to carry that to the gala.

Re: Something for my little "Hermione"

#7

Re: I want to know About Abalone too, Great wand! *LINK*

JKJ in East TN

>I'm not Steven, but I've heard that dust from various mollusk shells can be a health hazard. A moment with Google found this:


Hazards with shells

Re: Something for my little "Hermione"

#8

Steven Antonucci

read it :-)

steve antonucci

>

Re: Something for my little "Hermione"

#9

Steven Antonucci

Thanks you all

steve antonucci

>I think that the link above describes what I've heard about shells in general, but I'm very careful to keep it wet (a little spit on the sandpaper makes a paste vs. dust.) It's also so small, that I figure it can't be too much of a hazard.

Steven