Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Filling voids

Posts

Filling voids

#1

Steve Kubien

Filling voids

Steve Kubien

>Evening everybody,

I think I've screwed up. I took a roughed out mulberry bowl and finished it (in under 2 hours which is a record for me!). It had a bit of rot to it but I thought it was solid enough to stay. I was wrong. Now that I have finish sanded and applied one coat of danish oil it occurs to me that I should have filled the void (I was thinking epoxy and coffee grounds) before taking the finishing cuts and then sanding.

Is that the normal oder of operations for filling voids; fill 'em then take the finishing cuts, then sand and finish? Is there an easy way of doing it now? There is nothing left to the base to re-chuck it. I suppose I could adapt my doughnut chuck with longer bolts so I could do the inside and out but centering it will be a bugger. Any ideas? Any suggestions? Do I now have an "art" piece on my hands?

Thanks,

Steve Kubien

Ajax, Ontario

Re: Filling voids

#2

Re: Filling voids

RonZ

>Sorry but at least to my knowledge your order of things is S.O.P.

As far as what to fill it with, your imagination is the limit. I use thick CA glue if the area is small or epoxy when it is large, filling the bubbles with CA. You can use translucent dyes alone or with kitty litter for texture; metalic powders such as brass or aluminum, I have several colors of aluminum.

Re: Filling voids

#3

Re: Filling voids

Ralph Watts

>Steve,

One way to fill and avoid rechucking is to use curved cabinet scrapers. Fill the bad areas with your choice of materials, then use the scraper to level the fill material. A final sand & your good to go.

Re: Filling voids

#4

Re: Filling voids

Bill Hale / The Wood Spinner

>I do a lot with Turquoise. As it is a stone I sand and finish with sanding sealer. Then I do the inlay, resand the areas I worked on and refinish the total piece.

Good turning and be safe

Bill in Casa Grande, AZ.

Re: Filling voids

#5

Re: Filling voids

john lucas

>I agree, I use cabinet scrapers and sometimes files on the concave surfaces. I usually try to fill and turn before getting it off the lathe but sometimes you do get that errant crack or void that develops afterword.

Re: Filling voids

#6

Steve Kubien

Thanks everyone

Steve Kubien

>I appreciate the help. I'll mix up some epoxy/CA/coffee goop once the danish oil dries and try to fill it. I'll reintroduce myself to my curved card scrapers (we haven't spoken since I got my lathe) and give it a go. I suppose the worst thing that can happen is that it makes more solid firewood.

Cheers,

Steve Kubien

-too bad because I really liked this piece of wood.