Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Spalted Maple Bowl

Posts

Spalted Maple Bowl

#1

Spalted Maple Bowl

George Van

>I thought this spalted maple bowl, 8.5�x3� had nice enough color to show others. The finish is Russ� O/V. This has an undercut rim to a 3/16� wall thickness measured by Keith�s new Gage'T. Comments and suggestions for improvement appreciated.


img

Re: Spalted Maple Bowl

#2

Re: Spalted Maple Bowl

Allen Neighbors

>George, I think the form looks to be perfect. Inward sloping rim with the undercut is nice... makes it easy to handle. Finish is superb. Really some nice work. Not even a hint for improvement comes from this novice. :)

Re: Spalted Maple Bowl

#3

Beautiful!

Jennifer@Indy.USA

>

Re: Spalted Maple Bowl

#4

Re: Spalted Maple Bowl

Donna Banfield

>Good job George. Spalted Maple can often have tearout or 'chunk out' if the spalting process is advanced. This is not an easy thing to avoid or cure. I can see no evidence of this in your bowl.

I also like the slight lip of a foot, just enough lift so that the bowl doesn't look like it is a permanent fixture on the surface on which it sits.

Re: Spalted Maple Bowl

#5

Re: Spalted Maple Bowl

George Van

>Thanks everyone for the comments.

Donna, my best tool for spalted is the HSS forged gouge by Henry Taylor, light cuts and the curls flow off the skewed edge.