Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Chainsaw Husqvarna versus who knows

Posts

Chainsaw Husqvarna versus who knows

#1

Chainsaw Husqvarna versus who knows

David Breth

>A couple of years ago, I purchased a craftsman chainsaw (it was what I could afford). It has been pretty much nothing but trouble, and has been in for warranty repair enough times that this time around I will end up getting a store credit for approximately what I paid for it.

Frankly, I don't want a store credit. I want a chainsaw. But my problem is the same as it has been - I've got the cash handcuffs on, and while Sears will make it right with me in the form of a store credit, they will still be into me for $150ish.

The only chainsaw they have that I would consider is a Husqvarna Rancher with a 20" chain for $400. If I can cut a deal that puts me into the chainsaw for say...I dunno...my original $150 plus another $150, am I into a decent chainsaw? I think I would more prefer a Stihl of some kind, but again - the store credit cash handcuffs are applied.

So I think I've got these options:

1) buy the husqvarna, cut the best deal I can

2) hold the store credit for another time, print money in the basement and buy something else using monopoly money. If I can't cut an acceptable deal with Sears, this option is a lot stronger)

3) try to trade the store credit to somebody at work who intends to make a purchase at sears for even money.

4) something else I haven't thought of yet.

I know this e-mail is all over the place, but I've really been struggling with this and could use some help. A big part of me wants to try to talk Sears into buying me out with cash, but that seems like a pretty unlikely option. Not that I'm particularly angry with Sears, in fact I've always found them to be very quick to help me in these kinds of situations, but the whole thing is frustrating.

Thanks for your time -

David B.

Re: Chainsaw Husqvarna versus who knows

#2

Re: Chainsaw Husqvarna versus who knows

Ken Oakley-Sunny St. Cloud, Fla.

>I used both the Stihl and the Husky before buying my own. After Hurricane Charley I needed a big saw and chose the 24" Husky. Cut up some really big, (36-48" dia), oak trees with it. Not one problem with it.

Re: Chainsaw Husqvarna versus who knows

#3

JL

Re: Chainsaw Husqvarna versus who knows

JL

>I like Husqvarnas. I wouldn't buy the 16", but I would buy an 18" or 20" without hesitation. (I've got an 18" and a 16".) If you can cut a deal that brings the 20" down to a more "achievable" price, go for it.

Re: Chainsaw Husqvarna versus who knows

#4

Re: Chainsaw Husqvarna versus who knows

Barry Turner

>I have a Stihl 361 with a 20" bar. It's at the low end of their professional grade saws. It's over $600 but I love it, probably because it's 58cc's. I was used to Poulan, Homelite and McCulloch saws with 33 to 38 cc engines. There is no comparison. A few cc's makes a world of difference.

Under the constraints you describe, I'd go for the Husqvarna....I've heard some very good reviews. A lot depends on the quality of the dealer and the service you get. No matter what saw you get, sooner or later, it's gonna need working on. Keep that in mind.

Re: Chainsaw Husqvarna versus who knows

#5

Re: Chainsaw Husqvarna versus who knows

Troy German

>David,

I recently went through the research project of figuring out which chainsaw I want. Husqvarne and Stihl were pretty equal as far as reviews and such go. The difference seems to be at the local level (How well the store supports the customer i.e. you). Also, Husky seems to have better prices. My conclusion as two-part, don't spend any money right now, and when/if I do get one it will be a Husky. So, don't think that you are compromising if you get a Husqvarna. They are very good.

One more thing, I don't have my notes with me, but I seem to remember that the Rancher was a bit heavy and there are comparable Huskys that weigh less... and have an easy start feature. So my advice is to research which model Husqvarna You want and, assuming the kids have shoes and food, go for it.

Troy

Re: Chainsaw Husqvarna versus who knows

#6

here's a great online place to order huskies *LINK*

fred

>i've used them many times -- very good prices, very good shipping, very good customer service


http://www.alamia.com/index.asp

Re: Chainsaw Husqvarna versus who knows

#7

Vote for the Husky

Robert W - aka nailshooter

>After spending WAYYY too much time on the decision of which chainsaw to buy, I bought a Husky. I think you will be fine if you go that route, and a swap with Sears will put you at an end to this ordeal.

I have the Rancher 460 with a 26" bar on it, and I recently cut down a large live oak (36" diameter) with it. I used it for about 5 hours straight as the cutter and had a two swampers. I kept up and so did the saw. Never got too hot, never was hard to start since it has the pressure let off in the head. At the end of the day we had cut and stacked about three cords of wood, all cut to length for the fireplace and smoker.

The Huskys are good saws, and if that is your choice from Sears for a quality replacement I really don't think you will be sorry.

And it may just be me, but the sooner I can get things like this behind me with as little problems as possible, the better off I am. I don't like things like the Sears problems you are have hanging around.

Robert

Robert

Re: Chainsaw Husqvarna versus who knows

#8

I prefer a Dolmar

Jim K in Trappe PA

>Plenty of power. Pretty good mileage.

Jim K in Trappe PA


img

Re: Chainsaw Husqvarna versus who knows

#9

Re: I prefer a Dolmar

Mark Mandell - Gone Round In Jersey

>Great, Jim. But you better get a better chain 'cause the one pictured won't cut paper. |;-}}}

mm

Re: Chainsaw Husqvarna versus who knows

#10

Re: Chainsaw Husqvarna versus who knows

Raymond Overman in SC

>You can always try selling the store credit at a discount, say 10%, on Craigslist or here in the classifieds. Then you can save up for a chainsaw from a reputable local dealer.

There's something to be said for buying a chainsaw, which will need servicing at some point, from a guy with a service department out back. I've got a Husky 350 (which is comparable to the rancher) and I like it. I wish I had the 59CC model at times but as you said, it's what I could afford at the time and it's adequate.

Re: Chainsaw Husqvarna versus who knows

#11

Re: I prefer a Dolmar

David Breth

>Wellll, I dunno if that little bitty thing will go through cherry I've got.

Thank you all for your responses, I really appreciate the help. I'm feeling much better about my options now, and can formulate a game plan.

With all of these turning tools - dust collectors, chainsaws, band saws, lathes, gouges, everythng else, the choices are just overwhelming, and we all spend so much time researching what we want to do with these things it is incredible. One of the nice features of this website is to get some honest-to-goodness feedback of people who have faced the same tool choices for just about the same end use.

Thanks once again.

I'll be keeping my eyes out for a Dolmar! Wonder if I can pull a trialer with it.

Re: Chainsaw Husqvarna versus who knows

#12

Re: Chainsaw Husqvarna versus who knows

Wilford Bickel

>See what you can do on a Husky 350 with 16 inch blade if they have it in stock. I picked up one from my local dealer - he talked me out of the Rancher as he said it was too heavy for a part time user with bad shoulders like mine. Glad I took his advice and I have cut 31 inch trees with a 16 inch saw with no problems many times. The 350 is all the saw I need and has handled some Sycamore that is giving me 20 inch diameter blanks a couple of weeks ago that even after cutting in half length wise was all I and my wife could get into the back of her low pick up - glad I took hers and not my high 4 wheel drive!! It has a compression release for easy starting that really works and should run less $$ than the Rancher.

Re: Chainsaw Husqvarna versus who knows

#13

Re: Chainsaw Husqvarna versus who knows

Claudia Hayward

>I've got an OLD Husky Rancher. It must be 25 years old. Bought it used and it's seen many cords of wood under the chain. It still starts on the third pull of the starter. I'm looking for an excuse to replace it with a fancy new Husky but can't come up with one - it still does all I ask of it without a complaint.

Claudia

Re: Chainsaw Husqvarna versus who knows

#14

Re: Chainsaw Husqvarna versus who knows

Pat Mulligan

>Get the Bailey's catalog.I've been using Husky saws now for five years and have not had any problems with them.