Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Five Barns wood

Posts

Five Barns wood

#1

Steven Antonucci

Five Barns wood

steve antonucci

>I've made some friends here on WoodCentral, and every year, we swap wood at Bill's. This year, I swapped some pimento burl with Ron Sardo for a hunk of desert ironwood. I also had the pleasure of meeting Andy DiPietro, who gave me a hunk of siberian elm burl.

I decided to beat myself senseless on Ron's ironwood first. It's called ironwood for a reason. I made the form on the left and was nearly complete when catastrophe struck. if you look closely, you'll notice the "natural edge bottom". It was about 5x2.5" and 1/8" on the upper half, turned through a 1/2" hole. I knew it was bottom heavy, and I was working down the lower wall thickness when I cut through the bottom and watched the form spin on my tool. I may try to figure out a repair for it, but it's going to haunt me for a bit (contrary to previous reports, I did yell a lot of bad words when I lost this one ;-)

The other three elm burl forms are hollowed +/- 1/8" thick, with the tallest being 8" and the natural edge one being 4.5" tall. The bottoms are a wee bit thicker, but overall, I don't think it detracts from the feel of the piece in your hand.

They're bagged for final drying and finish work in a week or two, but I posted them now since I almost never post "finished work".

Comments welcome.

Steven

Re: Five Barns wood

#2

Steven Antonucci

Attaching the picture helps 

steve antonucci

>


img

Re: Five Barns wood

#3

Not too shabby!

Dominic Greco in Richboro PA

>Lookin' Good Steve!

Yeah, Ironwood is one tough wood! And isn't that Siberian Elm surprising as hell? Who'd a thought it would be that good looking? I roughed out several bowls from that stuff on Sunday.

See ya around,

Dominic

Re: Five Barns wood

#4

Andy DiPietro

They will get better looking with

Andy DiPietro

>3 or 4 coats of oil. I new you guys would really like the Siberian elm burl. I gave Mike Rubes a chunk of the elm too, so I look forward to see what he turns too.

Andy DiPietro