Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Just got back - Hollywood

Posts

Just got back - Hollywood

#1

Just got back - Hollywood

Jim K in Trappe, PA

>So a friend gave me some pieces of holly that he cut down a few weeks ago. They are about 5" - 6" in diameter, and a foot or so long - I'm thinking ornaments, finials, etc..

All that I know about holly is that it is very white. Does it age well, split, turn color, etc? The ends were almost black, but inside it is a creamy color. Any words of wisdom??

Thanks,

Jim

Re: Just got back - Hollywood

#2

Holly is beautiful to turn

Charles R. Smith from Victoria

>You will enjoy turning it, as it cuts like butter. When it ages, the wood does turn into a caramel colour, but is still quite light. It does crack badly (and so I have taken to boiling it after turning it). I have also turned holly that had already dried and cracked, and so I filled the cracks with coffee grounds and CA glue, leaving striking black lines in the light-coloured wood. I've use it for bowls, Christmas ornaments (snowmen with top hat of walnut) and lamp bases. When spalted, the black lines of spalting stand out against the light-coloured wood and are striking. I have a huge holly tree in my backyard in Victoria, and am almost wishing that it would blow down in a storm. I expect that your experience with holly will turn you into a lover of this wood.

Charles (who puts holly near the top of the list of nicest woods to turn)

Re: Just got back - Hollywood

#3

Re: Holly is beautiful to turn

Terry Fox

>Jim,

Charles is right - holly is great to turn, but it cracks very easily and often. It also gets a grey (blue) stain that is not attractive. Fortunately, I've had success with two-part bleach. I've never seen spalted holly without the stain.

Terry

Re: Just got back - Hollywood

#4

Keith Tompkins

Re: Just got back - Hollywood

keith tompkins

>Jim Grab all you can!! Usually it's like butter to turn, occasionally you'll come across a hard piece.... I've turned quite a bit of the stuff...one of my favorites.


img

Re: Just got back - Hollywood

#5

Oh my gosh!

Carol in Illinois

>That is absolutely incredible! How'd you do that??? Never mind - it's so far beyond me that I wouldn't understand the answer!!

Re: Just got back - Hollywood

#6

Re: Just got back - Hollywood

Atwerz

>How do dey do dat?

Re: Just got back - Hollywood

#7

Keith Tompkins

Re: Oh my gosh!

keith tompkins

>Hi Carol, Thank you.. I don't want to steal the thread, but the piece is turned, then carved. To allow enough wood to carve, the interior and exterior are turned on two different centers, resulting in different wall thicknesses. The linen-fold is carved with a rotary-shaft tool, and hand chisels. I've turned a lot of pieces, and carved quite a bit of furniture as well...combining the two skill-sets only seemed natural.