Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Tenon on Punky Wood...

Posts

Tenon on Punky Wood...

#1

Tenon on Punky Wood...

Wally Dickerman

>As a follow up on John's post on a punky wood tenon I suggest that you go to Reviews on WoW. On page 15 you'll find a tutorial with pics, showing my method, using dowels and a faceplate. You'll need to waste about an inch of the piece but it really works well.

Wally

Re: Tenon on Punky Wood...

#3

Re: Tenon on Punky Wood...

Lynn from Port Townsend

>Sorry about the NM.

For those of us that are newer to turning, what is WoW?

Re: Tenon on Punky Wood...

#4

Re: Tenon on Punky Wood...

Allen Neighbors

>Wally, thanks for the tutorial. Excellent cure for the common punky stuff! Well done tutorial.

Re: Tenon on Punky Wood...

#5

Re: Tenon on Punky Wood...

john lucas

>Wally excellent idea but wouldn't have helped on my vessel. The problem wasn't screws holding or the chuck holding. The problem was the wood was darn near rotten. It broke above the chuck. The dowels might possibly have worked if I used a faceplate because the foot would have been larger than the tenon that broke. Excellent idea.

Re: Tenon on Punky Wood...

#6

Steven Antonucci

I've used Wally's idea before too

steve antonucci

>and it is an easy and elegant solution to a difficult problem. However, like John, I occasionally try to turn stuff that used to be wood. Turning the interiors of these hollowforms can be done in 5 minutes with a long stick. The wood disintegrates under any pressure.

For this type of blank, it would be nice to vacuum impregnate some kind of resin or epoxy into the "roughout". The 15"x 6" round of spalted carpenter ant crap (maple) that I have in my shop weighs less than a pound, and I still hope to turn it. Probably not going to work out, but you gotta try things once in a while...

Steven

Re: Tenon on Punky Wood...

#7

Life is Too Short to Turn Crappy Wood...

Wally Dickerman

>

Re: Tenon on Punky Wood...

#8

Re: Tenon on Punky Wood...

Wally Dickerman

>Lynn, WoW is World of Woodturning. It's an invitation only website. (designed to keep out trolls and troublemakers).

Would you like an invitation? Send me your name and email address.

Wally

Re: Tenon on Punky Wood...

#9

Re: Tenon on Punky Wood...

Russ Fairfield

>Sometimes the best look wood is no longer wood. Saturating the tenon with CA glue works if the wood isn't too far gone. A waste block glued on with Polyurethane glue works for wood that is too far gone for the CA glue. Getting the waste block off can be another problem.

Re: Tenon on Punky Wood...

#10

That's close to the way John Jordan put it :)

john lucas

>

Re: Tenon on Punky Wood...

#11

Steven Antonucci

I'm 41, so I'm hoping I've got time :-)

steve antonucci

>