Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Thread cutter long

Posts

Thread cutter long

#1

Thread cutter long

don lewonczyk

>I need some advice on a enco thread milling cutter model 619-1392. It will cut threads 50deg to 62 degrees I think. I ordered the Nova OT mill and some of the accessories have sold out by the time they got to my order and the deluxe thread cutter and standard cutter are B/O. I have a woodcraft collet chuck and I know I can mount up to5/8" shaft to my headstock. I read the the thread about the jig by Al Cradell( hope I didn't missplell your name I have memory lapses) on the home thread cutting with router and cross slide and the all thread pipe. I saw the part number for cutter you used and that should work for me also. The reason I asked about the first cutter is that it carbide shaft HSS head with carbide teeth welded on and should last me till I die. Anyone with thougths about what I asked would be a big help. DonL

Re: Thread cutter long

#2

Re: Ought to work if you can hold the 5/16" shaft.

Al Crandall (N.E. of Indy)

>I'm not sure what they mean by .05 to .062 tpi unless they mean it will cut 20 to 16 threads per inch. I went with a router for the power source after finding that the lathe didn't have enough rpm to cut threads as cleanly as I wanted. This 1/2" diameter cutter will need even more rpm than the 3/4" one which I used. Not sure that you really need carbide to cut the few grams of wood from each threading operation, but if the high cost of this cutter doesn't scare you then go for it.

Re: Thread cutter long

#3

Re: Ought to work if you can hold the 5/16" shaft.

don lewonczyk

>AL, thanks for coming back with what I asked. The high cost don't bother me but scares the hell out of my wife! I had her snowed for several years but she's on to me now and since I do a lot of nothing with the stuff I buy its getting tougher to slip anything by her. Back to the bit, the Nova deluxe cutter looked like the Enco carbide cutter but was HSS and cost is $169.99. I really didn't see anything special about it but they claim it will cut perfect threads every time. Let me ask you, what if I mounted a jig on my lathe ways with a router and used the Nova OT, that would work, yes or no? I hadn't thought about the high speed of the router verses the 3400RPM of the lathe but it makes sense. Thanks for the help. DonL

Re: Thread cutter long

#4

Re: I've changed my mind. It won't work.

Al Crandall (N.E. of Indy)

>I wasn't aware of the Nova Ornamental attachment when I responded. After visiting the Nova site, http://www.teknatool.com/products/Specialised/ornamental.htm, and watching the threading video, I realize that you use the side cutting attachment in your spindle and a pointed round bit extends from the side held in by a grub screw in the end of the attachment. The Enco cutters in queston won't work for that mounting. They would need to be oriented out the end of the shaft and held by a grub screw in the side. The drawback I noticed with the Nova set up is that the female threads need a considerable relief area beyond the the actual threads which necessitates a deep lid design, and they can't be a very small diameter. The 60 degree double angle cutter addresses both of these concerns. That is, a female thread as small as 1" can be cut, and it can be threaded as close as 3/32" to the bottom of a lid or shoulder. I suggest not buying the thread cutting tool from Enco for use in the Nova. I don't see how it could work.

Re: Thread cutter long

#5

Re: I've changed my mind. It won't work.

don lewonczyk

>Al,I went back to the Nova site and looked again at the deluxe thread cutter. It looks like a double angle cutter like ENCO except it has only 4 cutters on end of it, not like ENCOs.The deluxe cutter mounts in the lathes headstock like it would in the router setup you have. I have a #2MT collet chuck with 10mm draw bolt to secure to head stock. It has different collets for it so I would be able to mount the 3/8" bit in it and I wouldn't have to have that deep offset like if I was using the side cutter with the pointed bit and grub screw deal. Do you think that it would be the same as if I had a router mounted on the lathe ways as having the bit fastened to the headstock? I don't like being a pest but I'd like to find out if for sure it will or will not work. Thanks for your time and answers. DonL