>I have a 50' white poplar tree that has to come down. : (
Has anyone turned this wood? Barbara Gill (who, by the way, is coming home today from an emergency operation yesterday) said poplar is the same family as cottonwood and chips a lot.
If anyone is interested, I'm going to have an awful LOT of white poplar laying in my yard. Come and help yourself, I'm only a 5-hr. drive from 1/2 of the east coast! : )
It's great wood to learn to turn and practice technique on. Especially when wet. Also makes good moulding stock; much better than pine or the Mystery Wood the factories seem to use. Worthless as firewood, however; no btu's.
I've got maybe twenty+ of them on my property that range over 90'. Great shade and we hate it when we loose one in a storm.
>Ruth - Poplar can have some very nice figure in it. Doug Newlove who posts over at Wow occsionally has brought a number of SW Hollow Form beatuties to our guild show & tell over the past few years. Should burn and colour well too for decorating.
>Lombardy Poplar? The slender, super tall, branches all the way to the ground, limbs that stick up alongside the trunk, leaves that look like cottonwood?
I have a Lombardy Poplar that has grown to about 60 feet (in this dry country) tall, and I'm afraid it's going to blow over onto my shop. When I planted them the nurseryman told me they were about a 15 year tree, and these have been in the ground about that long.
>No experience with it. What I'm talking about is the white "tulip" poplar we have all over the place here. Often is 30' to the first lead, 20-40" in diameter. Even, straight grain with green, blue, and brown shading in the heartwood.
Your Lombard sounds like it would yield results like NIP with all the knots.
>Ruth, as Mike says, it can sometimes have some very beautiful figure. In fact, it can be spectacular. Mike Manoney has a whole set of covered bowls at the Utah symposium a few weeks ago made out of figured Poplar, and the figure was incredible. I was drawn all the way across the Instant Gallery to see them, in spite of all the other great works of art there were between me and the Poplar. It is a relatively soft wood when wet. When it dries, it is so hard you can't drive a spike through it without drilling a hole first.
White poplar and Lombaedy poplar are two diferent trees. The Lombardy polar is a long thing almost without a trunk as the branchlets start almost from the ground, the white polar has a trunk that goes up ways and then a round or oval top. The leaves are similar to the cottonwood, not as large.
Around here the only thing it is used for is as secondary wood in furniture, like the sides of a drawer, or in places where it is not to be seen. Also for painted furniture and painted stair spindles.
>Hi Ruth, I like the Poplar that is white on the outside and green on the inside, turns well and makes nice boxes that don't move much. They want 1.95 a board ft. for it as paint grade lumber here in TX. Call your local sawmill. Glad to hear Barbara is OK, It's hell when you can't find a Doctor that knows the difference between an appendix and a gallbladder!
>>...I like the Poplar that is white on the outside and green
>on the inside, turns well and makes nice boxes that don't move much.
Tulip Poplar or Yellow Poplar (Liriodendron tulipifera) also called American Whitewood and a bunch of other names, has green heartwood. It is not related to the "true" poplars (populus), sometimes called Popple. When discussing it's important to distinguish between them since they are nothing alike. I once read a comedy-of-errors discussion on a sawmill forum that couldn't possibly have gotten any more confusing.
A lot of people turn and build things with Yellow Poplar. It's abundant around here and is one of my favorite woods to saw into boards - it cuts easily, air dries easily, and once dry is lightweight, machines easily, and is very stable. I have many trees over 2' dia and some over 3'. When one has to come down I use it for barn doors, shelving, 2x4's, etc. The grain is fine and usually clear and straight without knots. I think commercially it's mostly used for furniture - I even have a few sheets of 3/4" plywood made entirely of Y.Poplar. People (like me) do occasionally burn it for firewood but it doesn't heat like oak or hickory. The large commercial sawmill near here gets about the same for green Y.Poplar as red oak - around 30-45 cents/board foot.
>In my 4-H days, one sure way to get "dinged" on a forestry project was to identify a leaf or piece of wood as tulip poplar. The judge we had back then was quick to tell you that it is tulip TREE. According to him (I have to admit I've never bothered checking) what everybody calls tulip poplar is actually in the magnolia family.
>I had a landscaper, an arborist and 3 tree surgeons tell me this tree should never be planted in a yard. Its natural habitat is on the edge of a forest, it has surface roots (some impossible to mow over) and each root put out shoots along its length and these shoots grow 2" a day! It's trying to grow its own forest in my yard.
>Actually according to The Audubon Society Field Guide to North American Trees "Tuliptree" is no more correct than "Tulip-poplar". The most correct other than Liriodendron tulipifera is Yellow-poplar.