Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Spruce Burl Gloat *LINK*

Posts

Spruce Burl Gloat *LINK*

#1

Spruce Burl Gloat *LINK*

Darrell Feltmate

>While I was at Summer Camp last week as spiritual director, my wife got a call from a fellow I have never met who had had some work done in his back yard. He had a "couple" of spruce burls if I was interested in them. He and his wife were going to their cottage for a while but they were in the back yard so I could just go get them if I wanted them. So I backed my van into the driveway this morning and looked. There were 29 burls ranging from 6" to about 24" by guess. I loaded them into the van and brought them home. It amazes me that I can back into someone's driveway, load the van, and leave with no one saying anything. These burls look like a lot of fun and I will see they get one back.

I find that spruce burls come in two classes. One is usually found around the trunk and has large, crescent shaped grain runs. The other wraps around branches and has lots of twisted grain and bark inclusions. Either may have have spruce gum deposits that can be as hard as the wood itself. All spruce tends to glue itself to you as it turns but it is a lovely, creamy wood that finishes well.


img

Around the Woods

Re: Spruce Burl Gloat *LINK*

#2

Re: Spruce Burl Gloat

Norm Smith in Nova Scotia

>Darrell, That is quite a haul. I love the pastel colours that you find in the spruce burls.

Have fun.

Norm

Re: Spruce Burl Gloat *LINK*

#3

Re: Spruce Burl Gloat

Sean Troy

>Nice haul. I'm in the process of turning a nice size Spruce burl cap right now. Easy wood to turn.

Re: Spruce Burl Gloat *LINK*

#4

Steven Antonucci

If I did that to the family van, I'd be toast...

steve antonucci

>Luckily, I have a truck!

Nice haul.

Steve

Re: Spruce Burl Gloat *LINK*

#5

Re: Spruce Burl Gloat

Robert D. Macgregor

>There are a lot of those up here, but I haven't yet turned any. You missed one class, though: root burls. They tend not to be as large, and (for obvious reasons) most are never seen, but they have interesting, swirly grain patterns.

Re: Spruce Burl Gloat *LINK*

#6

So, how does one turn one of these burls?

keith zimmerman, Normal, IL

>I have an 8" burl of the type that wraps around the trunk and have been trying to figure out how to turn it. How would one orient one of these to enable it to be turned. Having a piece of the trunk sticking out of each side is what is puzzling me.

Suggestions?

keith

Re: Spruce Burl Gloat *LINK*

#7

Re: So, how does one turn one of these burls?

joaz

>I have turned quite a few of these. The ideal burl is the limb burl as the trunk burl is just like the tree grain and usually full of ant tracks.

The best limb burl would have the branch on the side but if it runs straight thru, you can leave the end grain of the branch in the bottom. It's a good idea to use the thin CA to seal the bottom to keep from cracking. The wood looks like ivory with blue and red streaks thoughout.

On the negative side...these burls can be full of "pitch" pockets that gum up you and your tools and lathe. The smell can be over powering and I think I have allergic reactions in the past. I don't do many any more although there are plenty around here as spruce is our major tree on the island.

I am including a pic from my web site.

Nice haul!!!


img

Re: Spruce Burl Gloat *LINK*

#8

Re: So, how does one turn one of these burls? *LINK*

joaz

>That a pretty small pic. Go to web site for better example.


http://www.maine-web.com/woodturning