Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

new mirrors

Posts

new mirrors

#1

new mirrors

john lucas

>Here is a selection of my latest mirrors. All have been shipped off to 2 galleries. Now I've got to get started on the next batch.


img

Re: new mirrors

#2

Re: new mirrors

Jim Shaver - Oakville, Ontario

>You do wondereful work John,

The picture is really great too!

Take care,

Jim

Re: new mirrors

#3

Dennis in Southern Oregon

Re: new mirrors

Dennis in Southern Oregon

>John, these are VERY nice. It looks to me that you have several days of time invested in some of these. Do you get paid for your time or is it a labor of love? Dennis

Re: new mirrors

#4

Re: new mirrors

Mike Brazeau

>John - you continually amaze me! These are beautiful to say the least. Your creative imagination just never seems to run out of steam. Well done.

Mike

Re: new mirrors

#5

Re: new mirrors

Sean Troy

>WOW! They look great !

Re: new mirrors

#6

Re: new mirrors

john pickett

>objects may be closer than they appear . . .good job!

Re: new mirrors

#7

You call these mirrors?

Troy German

>I can't see my reflection in a single one of them.

Seriously though, these are beautiful and very imaginative. Great job.

Troy

Re: new mirrors

#8

Re: new mirrors

tm

>very nice.

tm

Re: new mirrors

#9

Re: new mirrors

Terry Quiram, Roanoke Illinois

>John

Those are really great. I would be interested in how you did the segmentaing of the Birdseye Maple.

Terry

Re: new mirrors

#10

Ellis Walentine

Very creative, John!

Ellis Walentine

>How do you come up with so many nifty designs? Just naturally clever, I suppose.

Very nice,

Ellis

Re: new mirrors

#11

Re: new mirrors

john lucas

>Dennis The really fancy ones I lose money on if you actually count all the time but I enjoy making them and it lets me push the envelope. They actually faster than you think so I probably don't really lose money, I just don't make much more than minimum wage on those. :) The plain wood mirrors make up the difference. As my old boss used to say, if it wasn't for volume I'd go broke.

Re: new mirrors

#12

Re: Very creative, John!

john lucas

>not clever, just boredom. I hate to make something more than once. I turn about 10 plain wood mirrors with just turned details and then I make one or two with fancy stuff just to push the envelope, learn new techniques or simply to use up some fancy scrap pieces.

The router techniques I've been using on the boxes lately started with a simple test on the mirrors.

Re: new mirrors

#13

Re: new mirrors

Don O.

>Beautiful as always John. Great variety and patterns.

Re: new mirrors

#14

Re: new mirrors

john lucas

>This was done to show that you don't need power tools to do mitered segments. I think I originally did this demo for the Rhode Island AAW symposium. I made a homemade miter box. One fence was screwed down on one end only and clamped on the other. The back fence has two pieces with rounded ends that clamp against the dovetail saw. I just cut as close as I could to 5 degrees (36 sides) and tested the pieces. I adjusted one end of the front fence until I got exactly 36 pieces. Then I glued them up in pairs with veneer inbetween using hand pressure and counting to 20. I glue them up on wax paper so the paper and glue tend to hold the joint as well.

it's almost impossible to get a perfect circle this way because the veneer varies in thickness and your cuts vary slightly so I glued up half rings and trued them to 180 degrees.

I try to make these thick enough that I can put them on the lathe and part through the side to get 2 rings.

Re: new mirrors

#15

Re: You call these mirrors?

john lucas

>Troy You guys are too tough on mirrors when you look into them. I didn't want any brocken. :) I only let the good looking people like ruth and Jennifer, Carole and Molly look at the glass side.

Re: new mirrors

#16

wise choice

Troy German

>

Re: new mirrors

#17

"how to"

Dennis Taylor

>John, there isn't a "how to" on this site for making those mirror's by any chance?...Dennis