Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

roughed out vessels

Posts

roughed out vessels

#1

roughed out vessels

john lucas

>I have a friend who got behind on some of his commissions so I spent the day roughing out these vessels for him. I was going to do all 3 but the last on is fighting me. It was cracking while I was turning and punky in spots. It flew off the lathe once when the foot broke. I totally soaked the foot in thin CA and started over. Due to bad spots in the wood and checks that were there before I started I've had to take a good 3/4" off the overall width and of course had to shorten it in the process.

I had to take some time off to deliver some turnings to my local gallery and of course I got a bike ride in. I'm going to try to ride every day that the Tour de France rides and do the same type of ride. Much much shorter of course. I don't know If I can do it or not but I guess we'll see.


img

Re: roughed out vessels

#2

Re: roughed out vessels

C.W.Stivison

>Glad to see you are staying busy John. The turnings look great and I'm sure your friend is thankful. As for the tour maybe you should leave that to the young guys. LOL Watch out for the cars and be sure to wear your yellow jersey.(Like tour winners)

CW