Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

roughing Red oak

Posts

roughing Red oak

#1

roughing Red oak

Mike Nelson

>Just cut down a large Red oak and had to cut out the stump, just shoot me next time! The wood is beautiful, burl and spalting. I roughed to 3/4" on a few bowls 8" or so, then sealed with CA glue all over and inside the rims. I know oak cracks bad, anybody tried this or have other hints?


img

Re: roughing Red oak

#2

Re: roughing Red oak 

Mike Nelson

>


img

Re: roughing Red oak

#3

"CA glue all over"? As a sealer?

adrien

>

Re: roughing Red oak

#4

Bob Moffett

Re: roughing Red oak

Bob Moffett

>I have had good luck with Red Oak by roughing it out to about 10% thickness and then putting it in a paper grocery bag full of shaving and leaving in the basement for 6 months or so.

Re: roughing Red oak

#5

Re: roughing Red oak

ryker acuna

>Just finished two red oak hollow forms from a tree cut down a month and a half ago. Alcohol soaking. Got the information from someone on this site. Maybe they will chime in with website info. Best process I have ever used. Very marginal warping. Check it out.

Re: roughing Red oak

#6

Re: roughing Red oak

C.W.Stivison

>I was turning a small crab apple bowl that kept wanting to check and I used CA to seal the entire bowl. The checking stopped and it finished nicely. I don't know about sealing it before it checks. Let us know.

CW

Re: roughing Red oak

#7

CA glue all over

Mike Nelson

>Adrien, CA is a great sealer and an even better finish! Unless you order 16oz bottles and get the big bucks for your pieces, it is way to expensive for large projects. On big bowls I use Elmers white glue, I place them upside down on a small log with lots of shavings on the floor to catch the overflow and pour it straight out of the gallon jug. This leaves a thick clear seal and the bowl or whatever dries from the inside out. I hope the CA works on this oak, if not my wife has a little grinder that turns coffee grounds into bark inclusions!