Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Router sled used on lathe?

Posts

Router sled used on lathe?

#1

Router sled used on lathe?

John Kyler

>I'm working on a new project where I need to true up 50 table bases on a lathe. I'm thinking of using a router on a sled. Anyone have any experience with or ideas. I will need to square up the base bottom and top, and also clean up a profile that looks like )( a big cove.

It starts at 16" dia. down to 3 in the middle and then back up to 16"(it is 25 inches tall.

John

Re: Router sled used on lathe?

#2

Re: Router sled used on lathe?

john lucas

>John I haven't tried routing anything that large on the lathe yet. One problem I've noticed on smaller work is surface finish. I have to start with a much courser grade of sandpaper to get rid of the tearout. Another problem is keeping the cutter perpendicular to the turning. You have to make a pattern to trace with the router.

I'll be interested in your results.