Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Glue for belts

Posts

Glue for belts

#1

Glue for belts

Bill Crommett

>I have just separated the glue line on three new belts that I use on a one inch belt sander for sharpening my smaller tools. The belts seem to want to separate at the glue line, possibly because they have been sitting in the heated shop too long. The coupling strip is intact and just needs re-gluing. What kind of glue would be the best for making a 30 inch strip into a sanding belt again ?

Re: Glue for belts

#2

Re: Glue for belts

don lewonczyk

>Bill, I had a problem with 6x48" belts and Klingspor sanding said to forget it,just buy new belts. They use a resin type glue that is put under 50,000psi and home shops didn't have what it takes to do it and it wouldn't stand up to much of anything. I took their advice but you can always check for yourself. Don L

Re: Glue for belts

#3

Re: Glue for belts

Peter Hyde

>I know someone has used a flexible ca but it escapes me right now!