Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Powermatic 3520A Digital Tach

Posts

Powermatic 3520A Digital Tach

#1

Powermatic 3520A Digital Tach

Paul Coppinger

>To view a photo-essay of how I installed a digital tach to my PM3520A, visit my club's website

www.easttexaswoodturners.org

and click on "Tips". With slight modifications, this application will work with any lathe requiring accurate, repeatable speed control.

Hope this helps,

PAC

Re: Powermatic 3520A Digital Tach

#2

Re: Powermatic 3520A Digital Tach

Allen Neighbors

>Paul, I like the idea very much, because I want to start chasing threads for small boxes.

However, the page will not open the photos for me, even after several "refresh" clicks. Don't know what the problem is... can't even get a "show picture" to come up with a right click... it's like the computer doesn't recognize the photographs... They're just large gray squares.

Does it matter if the sensor is 3/16" or 5/16th", or is it necessary to be exact with the measurement?

Re: Powermatic 3520A Digital Tach

#3

Re: Powermatic 3520A Digital Tach

Paul Coppinger

>Allen,

The photo size may be too large for your modem to download. The pickup sensor requires a 0.2" diam drill hole for mounting and the rare earth magnetic is about the same size.

Hope this helps,

PAC

Re: Powermatic 3520A Digital Tach

#4

Re: Powermatic 3520A Digital Tach

Paul Coppinger

>Allen,

I replaced the 2 high resolution photos with lower resolution photos so try again,

www.easttexaswoodturners.org

& click on "Tips".

PAC

Re: Powermatic 3520A Digital Tach

#5

Re: Powermatic 3520A Digital Tach

john lucas

>Paul Thanks for posting. That looks intriquing. I really don't worry about speeds but people always ask you that when your demonstrating. I would kind of like to give them a better answer than, "whatever feels safe and comfortable". I know that's probably a good reasonable answer but that isn't what they want to hear.

Re: Powermatic 3520A Digital Tach

#6

Re: Powermatic 3520A Digital Tach

Allen Neighbors

>Thanks, Paul, I could finally see all of them but the second one. Don't know why it wouldn't open. But the third one shows it from the other side, so I get the gist of the modification. I appreciate your taking the time to post this excellent idea.