Picture of a skew in use. Circa 1927
Ron in Drums PA
>There is only one bevel

Knowledge You Can Build On — Est. 1998
Picture of a skew in use. Circa 1927
Ron in Drums PA
>There is only one bevel

Man, imagine if someone were to post,
Eddie Pacheco, San Jose, Ca.
>A picture like that of someone, in long sleeves, working over the headstock, and holding their fingers to a spinning piece of wood like that nowadays?
I noticed that this person is using a skew with the square or "as received from the store grind". This is how I first thought the skew was used and all I created were deep random helixes on the piece. Now I see that the preferred grind is with the curved cutting edge or radiused edges. I take it the "new" grind is more forgiving to learning how to use the skew? It certainly bailed my hide out of skew hell.
I bet he's wearing a long teck tie, too.
Troy German
>I'm guessing this picture was taken with the lathe off.
Troy