Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Will this hasten my demise??

Posts

Will this hasten my demise??

#1

Will this hasten my demise??

Wayne Leach - NW Ontario

>Occasionally when I get to turn I find that I have forgotten to re-charge the batteries in my Trident respirator !

Today I decided to make a modification to allow me to use my "OILESS" contractor air compressor to supply the air. I dial the pressure right down to 1-2 PSI and I adapted the hose to fit the helmet using a large rubber stopper which is a tight fit in the air hose inlet to the helmet.

It works "great" maybe better than the battery powered supply. The compressor air line gets clipped to my belt and long enough that I can move around the shop easily!

NOW the question-can anyone see why this might hasten my demise?? It takes in outside air and I place the compressor in a seperate room or even outside where the air is same as we normally breath. The piston has a leather sleeve which runs in an aluminum cylinder.

Thanks in advance for your inssight!

Wayne


img

Re: Will this hasten my demise??

#2

It is advised to

David Belser

>use a face plate when turning your head, not between centers!

The picture threw me for a minute. I don't see any problem with using a compressor for an air - But I'm not an expert.

- Dave

Re: Will this hasten my demise??

#3

Re: Will this hasten my demise??

Ron in Drums PA

>First, that looks like a Triton.

Second, where are the filters?

Re: Will this hasten my demise??

#4

Re: Will this hasten my demise??

DD

>I would find out how "oilless" your oilless compressor actually is. Compressors used for scuba diving or scott air packs (breathing apparatus used by firefighters) use special lubricants etc. I would be surprised if your industrial compressor uses the same types. I would only use air from an industrial grade air compressor for absolute emergencies, not for continuous use or the use you have identified. You can check with your compressor manufacturer, but I guarantee they will not recommend such a practice. I think you'd better off buying an extra battery for your Triton, if that is possible.

Doug

Re: Will this hasten my demise??

#5

Re: Will this hasten my demise??

eaglesc

>If I had to wear a get up that looked like that to do soemthing I enjoy I think I would take up knitting.

You've got to be kidding.

Re: Will this hasten my demise??

#6

JL

Re: Not recommended..

JL

>as stated previously. Breathing air compressors are of specific types. Breathing grade air is usually rated to a particular purity.

You can get a filtration device that will purify your oiless compressor air to breathing grade, but it might be cheaper to get a used system.

Do a search on supplied air respirator compressors and see what you can find.

Re: Will this hasten my demise??

#7

I meant Triton respirator

Wayne Leach-NW Ontario

>

Re: Will this hasten my demise??

#8

YES!

Mark Mandell - Gone Round In Jersey

>Air compressor air, even under lower pressure is NOT SAFE to breath. I must be specially dried and filtered. You are putting contaminents into your lungs. DO NOT DO THIS.

If you don't want to bother with recharging batteries and such, get a sime dust mask and be done with it unless you're turning material so hazardous that you should be zipped into a bio-hazard moon-suit.

mm

Re: Will this hasten my demise??

#9

Thanks-have discarded the idea!

Wayne Leach-NW Ontario

>

Re: Will this hasten my demise??

#10

Re: Will this hasten my demise??

Jennifer@Indy.USA

>Eagle,

I find myself agreeing with you...for a change :)

Jen

Re: Will this hasten my demise??

#11

Re: Will this hasten my demise?? (long)

Brian Simmons, Heflin, AL

>I was faced with a similar situation with my 3m Racal airstream. The one I bought was an older one that used obsolete filters. I retrofitted it to use ComfoII filters (100 filters + mouthpiece for $50 from Coleman's military surplus). Seemed that the battery was always a problem and uncomfortable to boot. I researched wether I should use my oilless compressor and found that they still contain lubricants even though there is not the typical oilbath. It is also of issue that the warmed compressor air will condense in the cooler hose. This condensation can lead to the growth of mold or other microbes. It is probably not worth a nasty respiritory bug.

My solution, I had a combustion blower from an old gas furnace and I built a filter box for it that uses 20x20 filters (a/c type) I use a coarse, fine and finally a smoke filter to filter my air. I place this on the opposite side of the shop and connect it to my helmet using 2 50' lengths of 1-1/2" new flexible sump pump hose. This works great! The blower and filter box (made from wood lying around)were free and the cost of the filters and sump hose was around $35. I plugged the blower into an outdoor Christmas light remote swith (Wal-mart clearance sale $12) and use the supplied keychain fob to turn it on and off.

Last year when I painted the truck, I placed the filter box in an adjacent building and was able to breath fresh air while painting in the shop.

On a side note, the sump hoses were purchased from ACE hardware and make an excellent replacement for vacuum cleaner hose. It can whistle annoyingly but at $8 for 50' it is about 10 times longer than a replacement hose from Lowes. It is very handy to leave the vacuum in the shop and use the hose outside to vacuum the entire van.

Good luck!