Jet mini lathes
Bob Jensen
>Anyone know of a switch part # for the Jet mini lathe with VS? We have 3 in our club that are defective.
thanks in advance,
bob
Knowledge You Can Build On — Est. 1998
Jet mini lathes
Bob Jensen
>Anyone know of a switch part # for the Jet mini lathe with VS? We have 3 in our club that are defective.
thanks in advance,
bob
Re: Jet mini lathes
Ed Kelle
>I had problems with my switch also, so I took it apart figuring I couldn't make it more broken. The little parts inside has worked their way loose, and once I figured out how they worked I reassembled it and it have gotten lots of use in the past few months. About 20 mins of my time. Beats spending money on parts, shipping plus downtime. Give it a try.
Re: Jet mini lathes
Bob Jensen
>Thanks Ed,
These are club lathes that get used a great deal and i'm afraid the switches have no fixes left in them.
bob
Re: Jet mini lathes
Stuart Johnson
>Bob, I don't know how the switch is placed on the machine but couldn't you purchase heavy duty switches and bypass the installed one. I would think if that is possibly it might be a cheaper longer lasting solution. You could then mount the switch anywhere you want.
Re: Jet mini lathes
keith zimmerman, Normal IL
>Mine went out and I ordered a new one from JET (actually, WMH/Tool Group). The part number is JMLVS-84. I ordered it through Amazon.com because that is where I bought my lathe.
Hope this helps.
keith
Re: Jet mini lathes
CCollier, Pasadena, Tx
>Grizzly Part# G8988
Re: Jet mini lathes
Bob Jensen
>Thanks for info,
But i doubt that will work with the vs model Jet, but sure looks like the non-vs switch, i will keep that in mind for our non vs lathes.
bob
Re: Jet mini lathes
Bob Jensen
>Thank you Keith,
That is the one i am looking for,
bob
This part # is for a VS mini
keith zimmerman, Normal IL
>
You're welcome Bob.
keith zimmerman, Normal IL
>Excuse the response just above. I missed the tree and didn't realize that response was to CCCollier.
Glad you can use what I posted for you.
keith