Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

A few finishing questions

Posts

A few finishing questions

#1

A few finishing questions

Carol in Illinois

>Hi, all.

I have some quesitions about finishing magic wands - I know, I know: pixie dust. But that aside...

I've been sanding to 800, under the influence of an earlier post where someone said, "The shine goes in before the finish goes on." Purty at 800, too. Q #1: should I go higher?

I've been using a variety of finishing methods, including a couple coats of Hut Crystal Coat High Gloss, followed by a couple coats of paste wax from Woodcraft buffed out with with paper towel with the lathe turning. Q #2: One coat of Hut? two coats? six? Q #3: Wax or no wax? More? Less?

I've also used 2-3 coats of shellac. I happen to love shellac. My kids think I'm nuts because of this. "Ooooooh! Shellac! Watch this, kids!" Q #4: Am I nuts? Why do I LOVE shellac? Do I need to get a life? Q #5: More coats? Wax, or not wax? Hut on top of shellac? More wax? Stay away from wax because it's gonna wear off anyway?

I don't think I can manage a CA finish yet... I think I need a tutor for that. I also don't like the idea of poly on top of a wand... k/o like encasing the magic in plastic. It just seems wrong. Q #6: other options? Something else that would be nice or work well?

I tried a tung oil finish: Minwax Tung Oil. Q #7: How many coats? What dry time between? Something on top of it?

Q #8: too many questions?

TIA.

Carol

Re: A few finishing questions

#2

Re: A few finishing questions

Ron McKinley

>I would use my old standby: Watco Natural, buffed out on the lathe and then polished and waxed using the Beall Buffing system. That preserves the natural feel of the wood.....Ron

Re: A few finishing questions

#3

Re: A few finishing questions

ET

>Hut Crystal Cote is a shellac finish. A couple of coats would be OK followed by a bit of wax to give a little protection.

Depends how glossy you want the finish to be. I, personally would prefer a semi-gloss edging to a matt finish. ET

Re: A few finishing questions

#4

Re: A few finishing questions

Terry Quiram, Roanoke Illinois

>Carol

A couple of suggestions. Use EEE before applying the Hut friction polish. It will make a nice difference. Another option is to heavy coat your piece with lacquer sanding sealer. Let the sealer soak in for a short time then wipe dry with a paper towel. Set it aside to finish drying. Take it to the buffer and work up a terrific shine.

Terry

Re: A few finishing questions

#5

Let me make sure I understand...

Carol in Illinois

>are you suggesting sanding sealer alone, then buffed? (Hmm... no buffer... Maybe one of those buffing thingies used on a drill press?? Tho I'm not sure how it would get into the crevices... Thinking... Thinking...)

Re: A few finishing questions

#6

That's my goal.

Carol in Illinois

>Preserving the natural feel of the wood in the wand.

Re: A few finishing questions

#7

Thanks. That's reassuring.

Carol in Illinois

>

Re: A few finishing questions

#8

Re: A few finishing questions

Ron in Drums PA

>Once again Russ comes through

http://woodturnerruss.com/Pen33.html

Did you give any though to no finish?

Just burnish the wood with a brown paper towel after the 800 grit and you're done!

Re: A few finishing questions

#9

Re: Let me make sure I understand...

Terry Quiram, Roanoke Illinois

>Yes, sanding sealer alone. Ed Davidson aka YoYoSpin finishes his bottle stoppers this way and they look great.

Terry

Re: A few finishing questions

#10

Re: A few finishing questions

Carol in Illinois

>Ah!!! very helpful! Thanks!

Re: A few finishing questions

#11

Re: possibly NO finish?

Carol in Illinois

>I've thought about burnishing w/ a paper bag... only to find out that at the moment, all I have in the bag department is plastic. Hmm...

Mostly what I'm concerned about is that a no-finish finish would end up looking grungy in short order, from hand sweat, oil, grime and troll bogeys.

Re: A few finishing questions

#12

Re: possibly NO finish?

Ron in Drums PA

>The first pen I made has no finish. It's made from maple burl and I use it every day at work. That grungy look from hand sweat I call a beautiful pinta.

The paper doesn't have to be from a paper bag, it can also be from a paper towel.

The paper from towel dispensers work well.

(before anybody has something to say, I buy my own. lol)

Re: A few finishing questions

#13

Re: A few finishing questions

Russ Fairfield

>There is no finish that can make wood look as natural as no finish. If these are wands in the hands of kids, they will be chewed on. There is nothing safer for a kid to chew on than wood itself or shellac. Remember that shellac is the only finish that is a food item.

Sand to 1200 grit, wet the surface with a damp cloth to raise the grain, let it dry, sand it again with the 1200, and forget about it. Give it a coat of shellac if you wish.

Re: A few finishing questions

#14

Thanks for all the insight!

Carol in Illinois

>

Re: A few finishing questions

#15

Except that...

Carol in Illinois

>... my wand adopters are almost all adults. So far, they seem to poke them at their foreheads (in search of memory, I think), rub them, and flip them over and over as they talk. I suspect that when out of my sight, they use them to scratch (or clean) their ears. Hmm... natural human wax. Eeewww!