Arrrrrgh!
Scott Hurley in N. VA
>I was just about finished, too...
Knowledge You Can Build On — Est. 1998
Arrrrrgh!
Scott Hurley in N. VA
>I was just about finished, too...
Yeah, I know...
Ron in Drums PA
>Blue background.
Re: Arrrrrgh!
Don in Central Illinois
>Whadda mean 'just about'. Looks like it's 'finished' to me. Sorry, been there, unfortuneatly, still doing that, but thankfully, not as often.
Hey! Quit copying my work!
Craig Daymon
>I feel your pain.
Re: Arrrrrgh!
Mark Wollschlager
>I have made a few of those too.
I was going to carve the big opening a little and put a stem in the small hole for the Flower power project Richard Allen is doing.
Its not too hard to be really consistent with that form.
Mark.
How unusual, thats never happend to me :)
Dave Belser
>
Re: Arrrrrgh!
Robert Henderson
>Looks like you made yourself an unnatural-edge bowl
Me Neither. :)
John Lucas
>
Re: Arrrrrgh!
C.W.Stivison
>Looks a little thin there Scott. As long as no one got hurt egos will heal.
CW
LOL! That was funny : )
Jennifer@Indy.USA
>
I've heard it could happen? : )
Jennifer@Indy.USA
>
How much time....
Steve Kubien
>...did it take to carve the rim like that? Exquisite work.
Runnin' duckin' and feelin' your pain
Steve Kubien
Been there, done that... some advice
steve antonucci
>First, break it into a bunch of pieces before you go nuts looking at it and toss it. It will save you the agony of trying to fix it (I have one on the lathe right now as we speak...)
Secondly, from the picture, I think I know the culprit here, having turned down to a wall thickness of zero or less many times beforehand. It appears that the wall is still relatively thick in the middle part of the vessel and you were cutting "top down", i.e. towards the foot of the vessel. I recommend that you turn small steps inside, and measure with caliper before taking a continuous cut. You'll feel them in the cut, and you'll be able to feel them with the calipers as well.
Once you get the top cut to final thickness, do not go back, or you'll quickly learn how to make the other form I've mastered- the one where you cut through the shoulder!
Steven
Re: How much time.... about 2 seconds...
Scott Hurley in N. VA
>
Re: Been there, done that... some advice
Scott Hurley in N. VA
>Steve,
Thanks for the advice. I'll try it next time.
Scott
Ouch
Brian Simmons, Heflin, AL
>I recently lost a bowl made from Bradford pear. Was around 11" in diameter and the wood was really nice. I did not want to donate the wood to the fire pile. I cut it up and was going to use the pieces to make an eye shaped (opening) bowl and my 8 year old son said that it looked like a boat to him. I connected the pieces after a little bit of trimming and created this "USS Blown Bowl"
Re: Brian, your Son has a good eye.
Allen Neighbors
>That is a spectacular save! I like it!
Re: Arrrrrgh!
Barry Turner
>Have you noticed that it's always during the last cut that things like this happen?