Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Log Selection for Turning

Posts

Log Selection for Turning

#1

Log Selection for Turning

Dgelnett

>I have a Desert Willow log about 15" Diam. It has a "v" damage spot going down one side for about two thirds of the log. I would think it would look nice if I could incorporate the "V" into the bowl but not certain as to how to cut the log for a bowl blank. Any advice?

Thanks

Re: Log Selection for Turning

#2

Re: Log Selection for Turning

tek-Brunswick, Ohio

>A sketch or a photo of the log would help us see what you have to work with. Then it would be easier to give you an answer.

Re: Log Selection for Turning

#3

Re: Log Selection for Turning

Dgelnett

>I could not take a photo that was a small enough for this site so here is a drawing. The actuall log is about 15" in diameter and about 20" long. The "V" on the side of the log comes within 3" of the pith.

Hope this helps, I can send an email with the photo if you need it.

Thanks


img