Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Speeds on a Oneway 2436

Posts

Speeds on a Oneway 2436

#1

Speeds on a Oneway 2436

Mike Brazeau

>A few Guild meetings back, Peter Hyde and I got talking about turning speeds and Peter offered to lend me a Laser Tachometer he had. I finally got around to doing some measurements yesterday. This was purely an academic exercise, because I turn at what ever feels comfortable and was curious, but not hung up on it. A browse of various sites this morning came up with discussions about mounting a a digital tach of some sort, with no previous postings of actual measurements, so I thought I would offer the information to other 2436 users out in the turning world. I rounded off readings to the nearest 5 rpm as a small change of the potentiometer makes a considerable change in the speed, depending on the pulley you are running on. That is illlustrated in the readings at the top end on the mid range. These could be considered nominal values. I tend to have the lathe on the mid position most of the time. Now I know, and I don't think I'll do anything any differently than I have since I got the 2436 2 1/2 years ago.


img

Re: Speeds on a Oneway 2436

#2

Re: Speeds on a Oneway 2436

Jack Riley

>Great info Mike! I'm sure all 2436 owners will appreciate your efforts in providing this to the public!

Re: Speeds on a Oneway 2436

#3

Thanks, good information.

Gary in Zirconia, NC

>

Re: Speeds on a Oneway 2436

#4

Re: Speeds on a Oneway 2436

Peter Hyde

>Mike,

Glad to see you got some use out of the tach.

I did much the same for my EVS 1950s Delta and have never looked at it since.

By the way how did the 2 part bleach thing work out? I have a project in mind so I need to pick your brains :-) See you tomorrow night?

Re: Speeds on a Oneway 2436

#5

Re: Speeds on a Oneway 2436

George Van

>Thanks Mike, this will be handy. At times I wondered it the dial information was stating a faster speed than it was spinning. I find the lack of vibration makes me think the object is spinning slower than indicated rather than faster.I have had mine on the midrange since I turned it on.