Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Nova Ornamental Turner - Anyone order one?

Posts

Nova Ornamental Turner - Anyone order one?

#1

Nova Ornamental Turner - Anyone order one?

Craig Daymon

>I'm very interested hear impressions on this jig. I was too slow to order one from the first batch. Also, if you're in the U.S., what was shipping on the unit?

Thanks,

Craig

Re: Nova Ornamental Turner - Anyone order one?

#2

Re: Nova Ornamental Turner - Anyone order one?

Bill Stehman

>They won't be shipped until late July and from WV so shipping will be reasonable. There are several forums and other good information on the web about the nova OT. They are not a rose engine but index turning which does limit applications and patterns however, with some creativity and small alterations it should be fun to play with. Latch onto all the old 1/4" straight shank router bits you can find as they can be reground and used as cutters to achieve different patterns. The machine post accessory is excellent for making perfect fitting box lids. With ornamental turning wood selection is the critical component.

Bill

Re: Nova Ornamental Turner - Anyone order one?

#3

Re: Nova Ornamental Turner - Anyone order one?

Colin Spencer

>Craig

I got in early enough but they told me the shipping (to Spain) was $300 so I cancelled. Have to make my own.

Colin

Re: Nova Ornamental Turner - Anyone order one?

#4

Bill Blasic

Re: Nova Ornamental Turner - Anyone order one?

Bill Blasic

>Craig,

I ordered one and total shipping was $23.95. Very reasonable as I think this thing weighs about 70 pounds. Can't wait for my new toy!

Bill

Re: Nova Ornamental Turner - Anyone order one?

#5

Re: Nova Ornamental Turner - Anyone order one?

Craig Daymon

>When I see this thing, it looks pretty worthwhile. Since it will cut threads, it does what a Bonnie Klein jig will do plus a lot more. I'm waiting to hear when the next production run will be. (I guess that means I can actually try to budget for it...interesting concept.)

-Craig

Re: Nova Ornamental Turner - Anyone order one?

#6

Re: Nova Ornamental Turner - Anyone order one?

john lucas

>I have a crossfeed that I bought from Enco. I'm wondering how hard it would be to build the indexing part of this jig and just make one myself. Of course there's that accuracy thing and I'm a very fledgling machinist but it might be a worthwhile project to look at.

The first thing I'm going to do is make a mount for the router to fit on the crossfeed. This will give me better control for the routed boxes I've been doing.