must disagree (long)...Re: Fungus prevention
GaryG in MD
>Sorry Brian, but my experience is different.
I've been fighting a rampant fungus attack in some nice pieces of curly silver maple I got recently. I had more than I could deal with promptly and made the mistake of putting it in plastic bags for a few days before cutting it to size. Never again! Paper only. (Sounds kinda like a grocery store...) As a result, I got the dreaded growing black spots. I could literally watch them getting bigger every day.
With plastic, there's a good chance you'll get a black fungus growing in only a few days. In my experience, putting freshly cut blanks into a plastic bag is a very bad idea. I'll never do it again. Let it sit in open air and risk the cracks or wrap in paper -- it's a good use for all those piles of newspapers laying around. After cutting to size, let them dry for a day or so before sealing with Anchorseal. If the spores are present, even that won't be enough to stop the attack because they're on the wood under the wax where the moisture is. It's best to rough right away and boil or DNA or microwave. But, of course, we always get more wood than we can rough -- hence the problem.
The problem is moisture -- the fungus grows in moist wood. Once started, it is hard to stop short of boiling or DNA, neither of which are very appropriate for unroughed hunks. The purpose of Anchorseal or shellac is to slow drying so the blank doesn't crack. Slowing the drying just gives more time for the fungus to grow. Indeed, I actually have the fungus growing in the layer of Anchorseal which is, after all, put on as a water emulsion.
I have been roughing these things as quickly as I can so I can deal with the fungus. I'm not talking about anything as nice as spalt here -- I'm talking about a nasty gray cast (from black pores) that takes over and makes the turning generally unattractive. Once you have a roughout, boiling or DNA will kill the fungus, but you still have ugly wood. So first, after roughing, you need to remove the offending color with lemon juice or bleach -- then DNA it or microwave it because even after the piece has been in one of these liquids, the fungus will start to grow again in two days. DAMHIK! You have to dry it quickly.
I have a 12 incher in DNA right now -- it'll come out in the morning. The DNA causes a surface color change (generally a darkening in lighter woods) too, but that's supposed to go away when you re-turn the blank and get beyond that altered surface layer. I'm hoping so, anyway. I'll let you know in a few weeks. I'll be very disappointed if I lose this fiddleback.
...Gary