Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

First time sharing

Posts

First time sharing

#1

First time sharing

Carol in Illinois

>Well, I decided to take the plunge and try to share what I've been working on for my first turnings, this past month. First, to see if I can manage to figure out how to do that!

If I succeed, you'll see a scan of a magic wand - in honor of Harry Potter. I've made about 35 of these so far, in various shapes and sizes, and from various woods. This one is 10", made of redheart, maple, and walnut and has blue goldstone in the bottom of the "mortise" that connects the maple and redheart.

Thanks to all the things I've been reading, links to instructional movies, and the like, I've learned a lot from all the members of this board. This particular wand, I decided to put to use what I'd learned from watching the skew chisel movies someone posted a link to earlier this week: I turned this one almost entirely relying on the two skews I have. Having fun turning in between teaching and clients. Your thoughts are appreciated.

Carol


img

Re: First time sharing

#2

Re: First time sharing

john lucas

>Nicely done Carol. Good clean lines. It comes up a little tiny bit big on my monitor.

Re: First time sharing

#3

Re: First time sharing

Gil Jones on Lake Seminole GA

>Carol, your magic wand is a fine piece of turning! Well done.

Glad that you do not take heed of the "big, bad, SKEW" comments.

The skew is a great tool, and leaves a smooth surface.

Gil

Re: First time sharing

#4

Re: First time sharing

tm

>nicely done,

tm

Re: First time sharing

#5

Re: First time sharing

Carol in Illinois

>Thanks, John. I'll try to figure out how to make the image a bit smaller. Can you give me an idea of how much "too big" it was?

Re: First time sharing

#6

Re: First time sharing

Carol in Illinois

>Thanks, Gil. I took heart from everyone's discussion about the skew, and also learned a lot from the online videos.

This little bit of fun is what inspired me to take the plunge and buy a lathe about a month ago. I got the Rikon midi - or is it mini? - at Woodcraft, and have been having a ball. My little bits of fun have improved as I've gone along. But even my ugly wands end up being snatched up by would-be wizards. I keep running out of inventory to give away. It's so fun to see someone's eyes light up as they pick "just the right wand" for them. After the Harry Potter craze dies down a little, I'll attempt the pen the fixings for which I bought. That's a bit intimidating. Well... a LOT intimidating, actually.

Re: First time sharing

#7

Re: First time sharing

Ken Grunke from SW WI

>Carol,

If I didn't know any better I'd say you've been turning a few years by the looks of this wand. Nice crisp detail, and good skew work. I didn't really get the hang of the skew until about 12 years after I started turning!

Re: First time sharing

#8

Re: First time sharing

Allen Neighbors

>Neat wand, Nice work, and you are smart... for learning the skew early on in your turning. Very nice.

Continue on... keep up the hard work.

Re: First time sharing

#9

Re: First time sharing

Jennifer@Indy.USA

>Carol, great job, and I'm glad you're posting some of your work. It's about time!

Looking forward to more pics from you.

Jen :)

Re: First time sharing

#10

Re: First time sharing

Jennifer@Indy.USA

>Carol when I use a single picture in a post like this, what I do is send the picture to myself in an email. I right click on the image and choose "SEND TO MAIL RECIPIANT". When Outlook or whatever program you use for email, asks if you want to make the picture smaller, click yes, when the picture gets back to you in an email it's the perfect size. Just save the jpg and then upload it into your post. Did that make sense?

Jen

Re: First time sharing

#11

Re: First time sharing

Tommy Holmes

>Very nice. I bet all sorts of wizards are coming out of the woodwork for one.

Re: First time sharing

#12

What a start!!

Dave Peebles Lyons, Ohio!

>Hi Carol.

I love it. The pic is great too..

Best wishes,

Dave

Re: First time sharing

#13

Steven Antonucci

Wingardium Leviosa!

steve antonucci

>As the father of a huge HP fan club, I say to you in my best Dumbledore voice:

"Well done!"

Clearly, you've figured this thing out. I've made about 20 wands myself, and I like yours better...

Steven

Re: First time sharing

#14

VGA

Jorge Castaneda

>Carol

if you are using a program to change the size, ask for 640 pixels, (VGA) it looks like you have 700.

You also can choose that resolution in the camera when you are shooting and forget about resizing.

Nice turning!

Jorge

Re: First time sharing

#15

Looks Good! *LINK*

Ron in Drums PA

>How thick is your wands? I'm wondering how big your mortise and tenons are? How ever big it is, you did a nice job.

Here is a link to some software that resizes images. Keeping the image at 640 wide is safe. Most newer monitors can handle 800. Yours is 934 wide which fits nicely on my 1280 wide monitor


Pixresizer

Re: First time sharing

#16

Re: First time sharing

Curt Fuller

>That's a beauty! I love all the crisp detail and form. It looks very magical to me.

Re: First time sharing

#17

Re: First time sharing

Carol in Illinois

>Huh. Thanks, Jennifer. I'll have to try that. My email is Yahoo, and I don't know if it does that, but I'll bet it does.

Carol

Re: First time sharing

#18

Re: VGA

Carol in Illinois

>Thanks, Jorge. I scanned the wand on my printer/scanner/fax/toaster oven... and I'm not fully sure how to manipulate the image in my various and sundry programs. I'll keep trying.

Re: First time sharing

#19

Re: First time sharing

Carol in Illinois

>Thanks for all the encouragement and suggestions, everyone!

The wand's I've made vary in circumference/radius. In some, the the "tip" portion - usually maple or walnut - is thinner than a regular pencil. In some, the tips are more the radius of, say, one of those kindergarten pencils, if you remember those. The handle portions are all turned from pen stock, and some are heftier and some more dainty. It takes much more time to turn longer wands. The longest I've turned is 11 3/4 inches, and the shortest about 8 1/2. The longer ones wobble quite a bit in the middle, and I steady those by hand as some of you have talked about. I realize that's controversial, based on discussions I've read... I'm very, very careful!

I've discovered you can't predict which wand a person will pick. Some he-men hefty types have picked wands that, to me, have a distinctly feminine feel - shorter, thinner, a more feminine cut or wood (wood has gender???). Maybe they're balancing their animus with anima.

I'll post pictures of a couple more I've done. I didn't take pics or scan some of my first before they flew out the window at the beckoning command of some wizard or another. I finally figured out I have to do it immediately, because they get adopted so quickly.

I'll work on resizing the picture. Hope I didn't annoy anyone with my first attempt. Thanks for the suggestions about how to do that, and the link to the software!

Carol

Re: First time sharing

#20

Ha! LOL :)

Jennifer@Indy.USA

>

Re: First time sharing

#21

Re: First time sharing

Robert D. Macgregor

>Are any of the wands glue-ups? I'm guessing that would be the only way to incorporate a phoenix feather, veela hair or unicorn heartstring...

BOB

Re: First time sharing

#22

Phoenix feathers etc.

Carol in Illinois

>Robert,

Well, as all the wands are at least 2 different woods, they're all glue-ups! I turn a tenon in the part that will become the pointy tip. The tenon is the diameter of a drill bit that I use to drill a mortise in the pen blank that will become the handle. The mortise is drilled a bit deeper than the tenon is long. I insert a precious or semi-precious stone (actually 3 or 7 bits of stone - magical numbers) in the mortise before gluing up the joint. After about an hour in a clamp - or more typically, between centers on the lathe - I turn the wand. I think I could turn sooner, but I'm reluctant to turn a wet glued joint... Thoughts on that?

I write up the magical/mystical properties of the woods and stone in a handout that goes to the wizard along with the wand. I also wrote up Rules for Using Magic Wands (to avoid any underage wizard from poking some Muggle and having his/her wand confiscated by the Ministry of Magic.) Fun!

Want to see some more?

Carol