Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Wet wood turning green...

Posts

Wet wood turning green...

#1

Wet wood turning green...

Dave Winters

>So I'm sawing up some wet Pimento wood, and the heartwood is this beautiful cream color with dark streaks, but after a day or so it turns an ugly dark green. It must be from contact with air. When I cut it again, I can see that the green penetrates about 1/32" on the face and edges and maybe 3/16" on end grain. Is this at all common in other species?

Anything I can do to prevent this or at least delay it?

My hope is that after the wood is dry, I can surface it and it will still be cream color under the puke green color.

I'm experimenting with alcohol drying and boiling on some small samples.

Thanks in advance..

Dave Winters

Re: Wet wood turning green...

#2

Re: Wet wood turning green...

Bob Boettcher

>Dave,

I had an interesting experience with wet wood turning green. I was cutting up a walnut tree that had been felled the day before. This tree had quite a thick layer of white sapwood, and I noticed tinges of green on it. It was misting and overcast, but I thought it was a bit too fast for algae or mold to be growing on the wood.

The next day, as I finished up the job, it was dry and partly sunny. I discovered that the freshly cut sapwood was snow white, but rapidly turned green in the sunlight!. I confirmed this by shading part of a piece and it was definitely the sunlight causing the green color. This was not intense green, more of a tinge. Oddly, as the pieces sat in the sunlight, they then bleached back to white, and the green disappeared.

You might try exposing some to direct sunlight, or treating with bleach to kill the green.

Good Luck,

Bob