>I turned these this week and also started turning a dozen hand mirrors. These were hollowed with the Hunter tool. Left to R spalted maple, maple burl, and ash. The ash piece was textured with the Sorby texturing tools and then I highlighted the edges with a flat woodburning tool.
>Use my trim router and the Ironfire Index wheel. There will probably be an article coming out in Woodturning Design on how to do this before very long. I sent some more details to the editor the other day.
>These look real nice, John -- I like the shapes and the wood selection. It looks like the Maple Burl box has a contrasting wood for the finial, too (?)
I'm not familiar with the tool you mentioned -- now I have some homework to do.
>The center box is a real winner in my book. It has a very clean sophisticated look. I like the work you did on the lid. I am looking forward to your article as well.
I like the middle box the best. I think that the bottom of the left-hand box is too tall. And the top of that box needs a crisper "finial". The base of the right-hand box is a little too big.
>Ed You have a good eye. I thought the same thing. I struggled with the spalted maple box. I wanted a sort of mushroom feel and started to make the base somewhat straight but smaller at the bottom. I didn't like that so I created the sort of barrel look. I've never been a fan of nice smooth tops so I usually add some sort of details. In this case I didn't want to clutter the top because the color and lines are so nice.
The box on the right is a save. I was teaching box making to a friend and made this little thing with a really tiny foot but I messed up the top when I textured it. The top was then smaller than the bottom. I decided that a new bottom and some taper to the bottom as it led up to the lid would solve the problem. I mismeasured the bottom and got it too large. It was supposed to be the size of the narrow portion of the box bottom. Oh well it was fun.