Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Gloating - Walnut Slabs Etc.

Posts

Gloating - Walnut Slabs Etc.

#1

Andy DiPietro

Gloating - Walnut Slabs Etc.

Andy DiPietro

>Hi Everyone,

I slabbed a couple walnut logs on Saturday. I took home two 2� thick x 18� wide x 6� long slabs that I can use later for coffee and end table tops. Can you say �Nakashima�? Of course it will take 2 years to air dry but I can wait. The slabs are just beautiful with nice curved grain patterns. My buddy Jeff has a 3� Stihl chain saw mill that he made. He also got 2 slabs and the owner of the logs got four slabs. I took home four blanks for HF�s and half of the crotch in the second picture which should yield an 18� diameter platter. Not bad for an afternoon of hard work. The owner is going to save me another log that I will cut up for HF's and bowl blanks later.

Andy DiPietro


img

Re: Gloating - Walnut Slabs Etc.

#2

Andy DiPietro

PIC2 

Andy DiPietro

>


img

Re: Gloating - Walnut Slabs Etc.

#3

Andy DiPietro

PIC3 

Andy DiPietro

>


img

Re: Gloating - Walnut Slabs Etc.

#4

Nice score...Not too "slabby"

Thad Parker

>

Re: Gloating - Walnut Slabs Etc.

#5

Re: That's a real reason ...

Allen Neighbors

>to gloat!! Take care of them, and they'll dry just fine. Awesome crotch piece... congratulations on the score.

Re: Gloating - Walnut Slabs Etc.

#6

Re: That's a real reason ...

Donna Banfield

>Andy, you and your friend worked for that walnut. My husband has the same type of set up and we've used it many times to cut slabs. It works, but it's hard work. Good for you.