Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Learn to use the Skew!!

Posts

Learn to use the Skew!!

#1

Learn to use the Skew!!

Russ Fairfield

>There are always those who say it is not necessary to learn how to use the skew chisel. The current thread on buying tools is typical. I disagree.

Every woodturner should learn to use the skew because it is the best tool for learning how wood is cut. It is also the best tool for learning tool control and using the bevel. After that, everything else is easier.

Re: Learn to use the Skew!!

#2

Re: You mean, if we survive,.....

Jamie Donaldson

>... everything else is easy!! I've survived turning for 22 yrs. without the need for skewing around! Why scare beginners away with a wicked instrument of destruction which they probably can do without? I can use them a bit when absolutely necessary, but I do very little spindle type turning which could be benefitted by mastering the beast!

Re: Learn to use the Skew!!

#3

Yes, learn to use the skew .

Ed Moore

>Russ, you are absolutely correct that learning to use the skew is excellent foundation work for learning to use other tools. I am a firm believer that one must learn the basics and build up from there. Many times beginners try to learn some sophisticated operation when they lack the fundamentals necessary for that operation. I feel that learning to use the 1/4" round skew to make good vee grooves in ornament icicles helped me go to the next plateau with some other tools.

Ed

Re: Learn to use the Skew!!

#4

Re: Learn to use the Skew!!

eaglesc

>I use the skew because it is the easiest to sharpen without the need of ridiculously priced jigs to sharpenm it.

A couple of swipes on a diamond stone and I am good to go.

Besides they won't give me an operators licsence for a gouge.

The call a gouge a gouge for a very good reason.

That is the mark left in the wood when I am done.

Re: Learn to use the Skew!!

#5

Re: Learn to use the Skew!!

Bill Neddow

>I agree totally, Russ. I just spent two days with Mike Darlow where a group of us did nothing but turn beads and coves (and more beads and coves). Also, remember, most other turning tools (at least the cutting ones) are nothing but skews with training wheels on them so you can't catch the points. Woops! I had better stop advocating use of the skew -- next thing you know, somebody will be claiming they are too dangerous to use.

Re: Learn to use the Skew!!

#6

Nick Cook teaches beginners the skew

john lucas

>Nick told me exactly what Russ just said. He feels that a beginner will learn to ride the bevel quicker with a skew than any other tool. I'll admit it took me a while to learn to use it. I didn't have any instructors. I could plane with it pretty good, learned that right off but beads were hard to learn.

I took a Windsor chair class with Curtiss Buchannan and we turned the top of out chair legs on a spring pole lathe using the skew. The slow speed took the fear out of the skew and because you could actually watch it cut you figured out how the bevel worked pretty quickly. That was a turning point in skew usage for me.

If you ever get to study under George Hatfield, Nick Cook or Alan Lacer you will certainly learn to use the skew.

Re: Learn to use the Skew!!

#7

Re: Yes, learn to use the skew .

Gordon Seto

>As a newbie not that long time ago. Initially, I was self-taught. One of the first DVD I purchased was the skew by Alan Lacer. Without knowing better, skew was the tool that I practiced on because it was the tool that I have more in depth instruction on.

I am definitely right handed; turning right handed is not much better than my left hand. I think every turning tool usage is an acquired skill.

We can get a catch on almost any turning tools; just don't scare the beginners.

Gordon

Re: Learn to use the Skew!!

#8

Shhhhhhhhhhhh Russ, Keep It A Secret!

Jim Shaver - Oakville, Ontario

>This is funny,

I would have cringed at the thought of using a skew 6 years ago, but over the last 4-5 years I have taught myself how to use and appreciate the tool. I went on a tool journey of looking for ways around using the skew and finally decided I needed to get it back into my use as a productive tool.

Now a days, I turn many hundreds of pens a year, all with a skew...it's easily my favorite turning tool. I think it took awhile for me to come back to it after I first tried it, many things changed the way I looked at the proper way to try it again, the DVD of Alan Lacers really was the biggest influence for me to try again.

Bill Grumbine introduced me to the Dance, I had to find my own tune...I could give up a lot of the turning tools I use today, but not the skew.....but's that's our secret, right??

:-)

Take care,

Jim

Still get the odd catch...nothing serious though

Re: Learn to use the Skew!!

#9

How do you get to Carnegie Hall?

Dominic Greco in Richboro PA

>Practice, Practice, Practice!

After some pretty spectacular catches, I had pretty much given up on using the skew. One day a couple years ago when Bill Grumbine was visiting, I happened to mention that I never used my skew. He then took some time, chucked a piece of knarly old osage orange onto my lathe, and showed me some pointers. Ever since then I've tried my hardest to make use of the skew. Btu I never felt comfortable enough to use it all the time.

When I was out of work for 2 months I spent a couple days in the shop (mostly to recuperate from the stress of job hunting). One day I decided that I wanted to turn some eggs and the only tool I was going to use was a skew. I had just gotten back from a workshop with Don Derry where he stressed the importance of shape and the easy steps to turn a nice egg or sphere shape. he made it look so easy that i had to try it. But I decided I wanted to use a skew. Three or four dozen eggs later I felt much more confident with using a skew.

I get sort of frustrated with people who think that they can just pick up a tool and learn to use it right off the bat all by themselves. Unless your some kind of turning prodigy, it ain't gonna' happen!! Then when the inevitable happens, they get mad and never touch the tool again.

Nothing worth while is EVER that easy. What helps is having someone who knows what their doing to show you the ropes (like Bill Grumbine did for me). So I say to a beginner, "Sure! Get yourself a nice skew. Then get someone to show you the right way to use it!!!"

See ya around,

Dominic

Re: Learn to use the Skew!!

#10

Steve Kubien

Love-hate relationship

Steve Kubien

>I think you are right on the money Russ. I am a newbie with less than a year under my belt. A monster P&N skew was my first decent tool and a R. Raffan video showed me how versatile a tool it is. I echo your advice in that we newbie's should learn to use it. If we get scared off turning because of a few catches, well, we probably shouldn't be too close to power tools anyway. Realize why the catch happened and don't do that thing again. (and wear appropriate protective gear at all times)

Cheers,

Steve Kubien

Re: Learn to use the Skew!!

#11

Re: After going to Georgia...

Allen Neighbors

>for the Gathering at TD's, over a year ago, I've finally learned to use the skew... somewhat, anyway. I watched Ruth Niles demo the use of the skew there. After I came home, I've practiced with it a little bit here and there, maybe a couple of minutes a day, and mostly just when I was making a handle. Then I got busy trying it on outside curves, and have sharpened it away to only 3" length.

Finally got to where I enjoy planing cuts, and can make straight end cuts, but I can't do a bead or a cove with it... yet. Someday...

Re: Learn to use the Skew!!

#12

Ken Grunke has 4 great short videos on this. *LINK*

Eddie Pacheco, San Jose, Ca.

>I tried using a skew as purchased and became a master at the deep and uneven helix. From information from you guys and playing and replaying these short videos from Ken Grunke my helixes are few and far between. When they do happen they are more equally spaced....:-)


Woodturner's Resource Videos

Re: Learn to use the Skew!!

#13

Steven Antonucci

Too many turners are focused on tools and not...

steve antonucci

>technique!

In the class of 5 I took with David Ellsworth last summer, I heard "what angle do you grind that" or "what brand is that?" about 4000 times. I didn't say it once. My only questions started "how do you..." or "why do you..."

As for me, I love my right to left skew... but I'm still working on left to right!

Steve

Re: Learn to use the Skew!!

#14

Re: Learn to use the Skew!!

Wilford Bickel

>Russ, you have hit the nail on the head. We have way too many turners today that have not learned the basics and wonder why they have problems. When I first started turning I don't remember using anything but skews and scrapers - I don't remember our high school shop having a gouge in it. We did learn grain orientation and which way we could cut the wood without blanks blowing up!! I hear so many turners that have started turning recently say "their is nothing to turning a spindle". I just love it when they say such and right before walking off I show them my cane with the 32 inch tapered shaft and tell them to let me know when they can make a shaft like it. I wish we had a more structured education set up through AAW that starts people off right with spindle turning and then progresses them into bowl turning and hollowing.

Re: Learn to use the Skew!!

#15

Re: Yes, learn to use the skew .

Jennifer@Indy.USA

>Ed, the 1/4 round skew is about the only skew that I use effectively. I need a ton of practice with the 3/4" skew I own. But I sure do love 1/4" one you gave me!

Jen

Re: Learn to use the Skew!!

#16

Re: Learn to use the Skew!!

keith zimmerman, Normal, IL

>One of the best things I've done is to learn to use my skew. I saw a demo in my turning club a couple of years ago and decided I needed to learn it. I forced myself to use the tool every chance I could and finally was able to work with it. I have seen several demos since then that served to reinforce everything. I use my 1/2" Kryo skew when turning pens and bottlestoppers.

keithz

Re: Learn to use the Skew!!

#17

Re: Ken Grunke has 4 great short videos on this.

Ken Grunke from SW WI

>Eddie, I'm glad you found those videos useful. I thought those were a bit small to be of help, and kind of short also but I couldn't figure out how to compress the videos and get more movie squeezed into them for the same amount of filesize. Thanks!

Re: Learn to use the Skew!!

#18

Re: Learn to use the Skew!!

robert davis

>russ, iagree totally. i turned several years using the skew sparingly. iguess it was nick cook who made appreciate the tool.. afunny thing though nicks mentor , rudy osolnick, idont think he even owned a skew

Re: Learn to use the Skew!!

#19

Re: Rude used a shallow flute....

Jamie Donaldson

>.. spindle gouge he made from a planer blade that was very close to being a skew. I have one of his and never use it, even if I could!

Re: Learn to use the Skew!!

#20

Re: Learn to use the Skew!!

Jimmy Edwards

>After all is said and done I am still scareed of the skew.

Re: Learn to use the Skew!!

#21

Re: Learn to use the Skew!!

C.W.Stivison

>Here is what I learned. Practice,practice,practice,practice,practice. And then be careful, very careful

CW

Re: Learn to use the Skew!!

#22

Be vawwwy vawwwy careful, silly rabbit

john lucas

>

Re: Learn to use the Skew!!

#23

Peter Charles Fagg (UK)

Re: Learn to use the Skew!!

Peter Charles Fagg (UK)

>I'm with you on this one!

Even after attending a one day course with Dave Regester here in the UK, my skew has lain idle. Whenever I practiced I shook so much with the concentration I was constantly making catches and in the end put the skew in a box so that I couldn't see it and therefore it didn't exist!

I really need to have a friend who is willing to spend some time helping me to relax AND use it to the full in return for coffee or similar otherwise it will stay in the box.

Regards Peter.

Re: Learn to use the Skew!!

#24

Re: Learn to use the Skew!!

eliot d

>I guess most turners know this trick: drive the work with a "safe " center -- not a spur center. then, if (when?) you get a catch, there is an automatic clutch working for you ( so long as you don't over tighten things), so the piece just stops. It's much less frightening.( I get scroll backs all the time; you're not the only one!)