Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Holly

Posts

Holly

#1

Holly

Wilford Bickel

>I picked up a large Holly log from a member of our Club Sat. I've never worked with it and wonder how stable it is. He has both ends waxed and so far I see no checking started. How stable is this wood with the pith still in for hollowing? Should I cut it on into blanks and wax it with the pith out. Any other good suggestions based on experience would be appreciated!

Re: Holly

#2

Re: Holly

Wilford Bickel

>Come on folks - surely someone has worked with Holly! See what I get for letting the wife attend the club meetings with me and want a special piece of wood!!!

Re: Holly

#3

Re: Holly

Barbara Gill

>I have turned quite a bit of it. So far stability has not been as much of an issue as staining. In this heat and humidity holly will quickly blue. I have had the best luck in warm weather with turning per Dave Smith's directions and soaking in denatured alcohol. It is a very nice turning wood without much character. It is also the only one I use a water base poly on. The one I use is very thin and will soak into the wood. Since holly really does not have a great deal of figure the poly is not an issue.

Re: Holly

#4

Re: Holly

Carole Valentine

>I assume it is green wood. You do need to take the pith out and cut your blanks. I have had good luck boiling holly blanks, letting them dry for a day or so then storing them in the freezer. My biggest problem is that here in VA where it is fairly warm and humid, the blue-gray staining will occur almost as soon as you cut the wood. The boiling and freezing seem to help that. Some people don't mind the stain, but I prefer my holly white. If left in log form outside, it will rot really quickly. DAMHIKT! It is a wonderful wood to turn.

Re: Holly

#5

Re: Holly

Claudia Hayward

>I turned a couple of holly bowls and found that the wood really moved a lot as it dried. I would definately boil it.

But it is a joy to turn, really smooth and not at all prone to tearout!

Re: Holly

#6

Re: Holly

Wilford Bickel

>Thanks to all for the help. I'll cut it tonight and if I can't boil it at least I'll freeze it to hold it till I can.

Wilford

Re: Holly

#7

Re: Holly

Wilford Bickel

>You know, I might need to check with LOML and see if she wants the blue cast - probably will want me to try some of both!!! LOL!!