>I was cruising the web on Friday and noticed that Amazon had a one day Lathe sale on model 46-715 9.8 Amp 14-Inch Swing by 40-Inch between Centers 3/4-Horsepower Woodworking Lathe. For under $350.00 plus shipping, it seems to be alot of machine. I would probably have to pay the same money if I ordered the mini lathe. I read the comments about this Delat Lathe and they seem to be mixed. As being someone who has never used a lathe at all, all I can do is go by best price per dollar spent. Please let me know if I made a good move, as I still can cancel this order without penalty until Monday.
>I hope they've improved it. I had the 46-700 which looks the same but is smaller. I turned a fair amount of wood on it but it always had a lot of vibration. I thought it was me until I got a mini lathe. The mini was so much smoother my turning skills improved overnight. It is a nice lathe if they've gotten rid of that vibration problem. It came from the adjustable pulley. I replaced it but there wasn't any improvement.
I have one of these. It was my first lathe and it is an entry level machine. I've since gone to a PM3520 and have the old one for sale. New, this lathe usually sells for around $650 so I'd have to guess that the one Amazon is selling for $350 may be a reconditioned machine.
When Delta first came out with that model the woodworking mags gave it a lot of praise in their tool tests. However, I have read many disparaging remarks about it on various turning forums. Whether or not these unhappy users have valid complaints or not is unknown. No doubt some of them may be. Not all of what you read on the web is gospel. I have had no problems with mine and another member of our turning club has one and turns out some very beautiful segmented pieces. Knowing what I do now, I would have done (and I recomend) the following.
First off I'd have joined the local AAW chapter (if I had known about it and/or AAW).
Next, I'd probably have started with a Jet mini as an entry level lathe.
Then, I'd have chased after every opportunity to learn from experienced turners and teachers in and out of the AAW chapter.
Hopefully, this will help you and others will comment on my recomended three first steps into this wonderful world of turning.