Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Pallets for turning?

Posts

Pallets for turning?

#1

Pallets for turning?

Jimiles-Charlotte, NC

>A few days ago someone posted the question - can you use wood from pallets for turning. I was at my local lumberyard the end of this week and picked up 6 Pieces of wood used for packing/shipping building supplies - about 3 feet long and about 2.5 inch square. Took them home and planed them. Found -Maple, Oak, Hickory, Poplar, Gum? and Sycamore. A few knots and defects, but great wood for segmented turning.

Short story: Same lumber yard. Last Summer. Noticed that had special ordered a pallet of 8' long Ipe deck boards and had 15 - 20 pieces left. The pallet it was on was made up of 3 rough sawn boards 5/4 inch by 10 - 12 inches wide and 8 feet long. It had a wonderful promising reddish tint to it, I wasn't sure what kind of wood it was but I thought it must have come from the same place as Ipe so it had to be something nice. They agreed to give me the pallet when they sold the rest of the Ipe, which was about 3 weeks ago. Took it home salivating at the great find I had made, planed a piece. Turned out to be some of the plainist, non-decscript wood - kind of like Gum with black splotches through it. Oh well, if nothing else it will make good segments.

Re: Pallets for turning?

#2

Re: Pallets for turning?

john lucas

>Many years ago I made a clock from Bird Eye maple that came from a pallet. Motorcycle dealers are one of the best places to get exotic wood from pallets. Just watch for the nails.

Re: Pallets for turning?

#3

Re: Pallets for turning?

Wally Dickerman in Arizona

>Several years ago, before container shipping, I had a friend who was a longshoreman who unloaded cargo on the docks. He once brought me 2 pallets that had come from Brazil. They were made of beautiful tupipwood. Several hundred dollars worth of it. What a find.

Wally

Re: Pallets for turning?

#4

Re: Pallets for turning?

Ron in Drums PA

>I got a skid of paper and the wood was purpleheart

Re: Pallets for turning?

#5

Re: Pallets for turning?

Bill Crommett

>Many years ago a friend who was a regular scavenger in the dunnage pile at the port of Detroit brought me a piece of Oak that was 6 X 8 x 12 ft long. I made a number of pieces of furnature from that chunk of clear Oak.

Re: Pallets for turning?

#6

Re: Pallets for turning?

john lucas

>Many years ago I was looking for a waterfall on a topo map so I could photograph it. It turns out is was on private property so I walked on in to meet the owner. He happened to be a very nice ex missionary from Africa who was also a woodworker. When they shipped his furniture back from Africa the crates were all mahagony, with some boards as wide as 24". He had so much he used some of it as the floor of his office.

Re: Pallets for turning?

#7

Re: Pallets for turning?

Craig Daymon

>I was up at the local exotic wood store last year and saw their bin of palette scraps and there were 4 nice size sticks of purpleheart. Each was about 1.5" x 1.5" x 20". They said I could have them no charge.

-Craig

Re: Pallets for turning?

#8

Re: Pallets for turning?

RevDoug

>My dad had me help him with a pallet that was on the side of the road one night. We got the HEAVY sucker home and decided to cut into it to try and figure out what the wood was. Come to find out that it was South African Walnut. Had never heard of it before or since. Neat stuff though.

Turn 'em round,

Re: Pallets for turning?

#9

Re: Pallets for turning?

Tom Storey

>I think it now rare to find 'exotic' or really good quality wood in pallets these days. But, not that many years ago it was not unusual to find great wood. I think the 'makers' in the far away countries have gotten wise :)