Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Old Lathe Tools

Posts

Old Lathe Tools

#1

Old Lathe Tools

Roy Girolami

>i recently acquired an old lathe and a box of tools that came with it. There were a lot of tools made out of old files and a bunch of Buck Bros tools. Now I have a question about the Buck Bros tools. Almost all the tools had a single bevel, like a woodworking chisel, most of them tapered in thickness from the handle to the edge and they were all longer than I'm used to seeing. To give you an example, there were several chisels that were no more than 3/16" wide that had blades about 7" long. What do you suppose they were meant for? I have no idea of the vintage of the tools, but the lathe was 80 years old.

Roy Girolami

Apex, NC

Re: Old Lathe Tools

#2

Keith Tompkins

Re: Old Lathe Tools

keith tompkins

>Roy, they sound like mortising chisels.

Re: Old Lathe Tools

#3

Re: Old Lathe Tools

john lucas

>Keith has it. That's exactly what I was thinking when I read your message. If the sides of the chisel are the same width as the cutting edge and they are fairly thick at the top of the bevel then I'd say they were mortising chisels.

Re: Old Lathe Tools

#4

Re: Old Lathe Tools

Roy Girolami

>okay, they resemble mortise chisels, except they don't have a bolster where the blade tang goes into the handle. The steel is the same thickness, so any blows on the handle would split the wood. Also the handles are definitely for turning tools, no sign of impact on the ends and fairly long, about 8".

Roy Girolami

Apex, NC

Re: Old Lathe Tools

#5

my mortising chisel

john lucas

>I found this one at the flea mkt and added a handle. the Tang is flat on the bottom so I don't think it will split the handle. I've used it a fair amount. You don't have to hit it hard to penetrate the wood. I will be using it tomorrow to duplicate some chair spindles. It's faster than setting up my router when I only have to do one or two. If your interested in selling them let me know. I could use more sizes.


img