Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Yankee Woodturning Symposium question

Posts

Yankee Woodturning Symposium question

#1

Yankee Woodturning Symposium question

Ed Moore

>Where was everyone???

There are lots of good turners in New England and the line-up of demonstrators at YWS was outstanding. Yet they fell short of their expected attendance. I don't know the numbers, nor do I need to know, but there was room for more and more should have attended (This Moore did and he is glad!)

My point is simple: Lots of you in the northeast missed out on an excellent opportunity to see some of the best demonstrators around.

Ed

Re: Yankee Woodturning Symposium question

#2

Brad Vietje

Re: Yankee Woodturning Symposium question

Brad Vietje

>Hi Ed,

Brad (a.k.a. Gary) here.... I didn't even know about it until last Thursday or Friday. I've been incredibly busy starting a new business, so I may not have noticed if it was discussed here, and couldn't have attended anyway. I haven't been to a turning club meeting in at least 6 months, and for a while dropped off this messageboard with almost no time to even read about turning. Besides this forum and an electronic newsletter I get, I now have almost no contact with the outer turning world -- even my AAW membership has lapsed so I no longer get the American Woodturner... Hopefully I can find some turning time soon, and perhaps even get back up to speed with the AAW, my two clubs, etc...

Safe spinning,

Brad Vietje

Newbury, VT

Re: Yankee Woodturning Symposium question

#3

Brad, your situation certainly ...

Ed Moore

>makes sense. But, where were the many who didn't show? Let's assume that the average membership of the clubs was forty. That would yield about 280, and out of area folks like me would make up for those who couldn't make it. I don't think that they got 280.

The Ohio Valley Woodturners Guild does a bang-up job and invites great talent. I would like to go to that in late October, but unless I sell lots more than I have been I won't make it. But after the YWS I won't feel that I didn't get a good "fix" for the year.

Ed (aka "Special Ed")

Re: Yankee Woodturning Symposium question

#4

Cost/Benefit ratio

TDaniel

>I don't know about others but I have to consider the cost/benefit ratio before attending any symposium. Art sales are off this year and travel expenses are up so that makes me look very closely at the demo line-up at symposiums. If there isn't a name listed among the demoers that I think will lead me in the direction that I want to go I cannot afford to attend. I cannot attend unless I think my sales or my prices charged will increase as a result of a demo. I wish I could just go to learn whatever but I can't.

TD

Re: Yankee Woodturning Symposium question

#5

TD, distance was an obvious factor ...

Ed Moore

>in your case. I'm asking about the New Englanders who didn't support their own symposium.

I drove over 1300 miles round trip from the Roanoke area. My brother-in-law lives 11 miles from the site and the money saved by staying with him was not insignificant. And SWMBO wanted very much to visit her brother, so she paid my fees. Of course I complained ... ;^D not likely!

Ed

Re: Yankee Woodturning Symposium question

#6

Re: Yankee Woodturning Symposium question

Gordon Seto

>I beg the difference. They already maxed out in some of the rooms. The two rooms on the 2nd floor are small. Some people were standing by the door. It was not nearly as bad as Louisville Symposium last year. That is why we are not going to the AAW Symposium this year; even my BIL lives 20 minutes away and we don't need to stay in hotel.

We haven't been to many Symposiums; the best experience was the Turning 2005 organized by OVWG. As far as I know, most of members in our Clubs who went in 2005 have registered for 2007. I think their success was due to the great line up, the hard work of organizing club members and they limited the number of attendees.

Gordon

Re: Yankee Woodturning Symposium question

#7

Thanks Brad,

Jorge Castaneda

>Ed,

I wanted to attend, but this is the busy to the max time of the year for me, cannot afford to loose income...

I bet many other new englanders are in the same situation, remember we have only 2 seasons, snow removal and road repair. For us it would be better if the gatherings were in Jan or Feb when our work is very slow or standing still.

Take care

Jorge

Re: Yankee Woodturning Symposium question

#8

Oops!

Jorge Castaneda

>That was from an earlier post... don't know how it got there

Re: Yankee Woodturning Symposium question

#9

Re: Yankee Woodturning Symposium question

IAN

>Ed, the last count I heard was 215 attendee's that was as of sunday noon. it was a less than hoped for. I will probably know more after my next club meeting. on the 23rd.

for me smaller crowds are prefered, allowes better viewing and more personal exposure to demonstrators.

from what I was told my club was the most represented out of all the new england clubs. about 25 of us went. out of a 85 member club.

and we had a great time.

IAN

Re: Yankee Woodturning Symposium question

#10

Re: Yankee Woodturning Symposium question

john lucas

>Ed We have 35 members in one club and 20 in another and only 1 person went to the Southern States Symposium which is 250 miles away. Many club members simply aren't symposium goers. For my part the money is always a problem. I go mostly to meet other turners and see friends. It's nice to see a big name turner but that's really not the biggest draw for me.

Re: Yankee Woodturning Symposium question

#11

Bill Blasic

Re: Yankee Woodturning Symposium question

Bill Blasic

>I cannot tell you why those in the area did not go but I can tell those that didn't go that they missed a very well run symposium. For their first they did a great job. If they have another and if they reach their attendance goals they will probably have complaints due to the size of some of the rooms. With the people who were there the smaller rooms that I went to were standing room full. My only complaint was that I could only go to 4 rotations a day. There was a super line up of demonstrators, the banquet was excellant, a continental breakfast each morning, a very good raffle, vendors selling turning stuff and about 200 very nice people sharing a common link - Turning! Throw the very reasonable cost of the symposium and ask me if the 9 hour drive was worth it, sure was!

Re: Yankee Woodturning Symposium question

#12

Re: Yankee Woodturning Symposium question

Ed Moore

>John,

You raised an interesting point. The number of big hats that I haven't seen is getting small. In fact, there are only a few big names that I haven't seen that come to mind. I have been to the last two OVWG symposia west of Cincinnatti and only half of the 2007 list would be new to me.

Someone remarked that OVWG has a limit on the number of attendees. That number was determined by the size of the dining hall. There is supposed to be a new dining hall being built that will have a larger capacity, so maybe the number of attendees will increase in 2007.

Ed

Re: Yankee Woodturning Symposium question

#13

Re: Yankee Woodturning Symposium question

Don O.

>I agree with Bill, I had a good time at a well done event. Sorry I missed you Ed, would have liked to meet you. Yes some of the rooms were small and very full. The larger rooms were very nice though. Great line-up too. I was surprised more people did not go. We had 5 from Upstate NY ( hosts of Totally Turning 2007). I also agree with Brad that web publicity was lacking, especially on forums like this.

Re: Yankee Woodturning Symposium question

#14

Brad Vietje

Poor Timing ?

Brad Vietje

>This is a pretty hectic time of year for many in New England. Where I live is pretty rural -- not typical of the Massachusetts suburbs -- but many people around here are putting in their gardens, and catching up on all the property maintenance chores that pile up over the winter months.

Maybe late fall is just a better time of year ? The Totally Turning symposium in Albany is in October, and is well attended. The New England Woodturning Symposium in Southern New Hampshire is held in early May -- still a little early for a lot of outdoor stuff way up here -- and is always a sell-out, though that's every 3 years.

Maybe its just timing?

Safe spinning,

Brad Vietje

Newbury, VT

Re: Yankee Woodturning Symposium question

#15

I agree

Dave Belser

>I agree Brad. This was a great symposium, great line up, great venue and great host city. This time of year is filled with graduations, weddings, and yard work! Just to name a few. I almost bailed on going because of what felt like a crushing amount of work piling up on me. Boy am I glad I went, hope they can keep it going.

Maybe move the symposium a little earlier in the year.