>Back from the Yankee Turning Symposium and my head is still spinning. I've got ideas for 3 new works in my head and I can't wait to get started on them. Unfortunately, today I have to clean and reconfigure the shop for turning (I've been working on a built-in) and then I have a knob job to do.... I need a clone.
>I commend the seven clubs that put this excellent symposium together. I met several folks whose names pop up here on Wood Central and that was fun - Ed Kelle and Brad Vietje come to mind first. There was an all-star cast of featured demonstrators and they performed very well.
I was really impressed with the Instant Gallery. The quality was first-rate and the offerings were diverse. Jimmy Clewes and Michael Hosaluk critiqued and did an excellent job. Their comments were good to chew on and contemplate.
I had to skip the banquet because I was staying at my brother-in-law's place 11 miles away and he wanted to serve lobster that evening. I always joke that one should use end-grain sealer like their brother-in-law was paying for it. When he stopped by to see the Instant gallery I introduced him to Jimmy Clewes as the one who buys my end-grain sealer. ;^D
The trip was long, but I'm sure glad that we came up for the first Yankee Symposium. Of course I spent too much on tools, but what's new?
>I have to agree-I had a great time also. The organizers did a good job. Great line-up of demonstrations and vendors. I managed to see a few folks from WC but missed others. Guess we should have had a meet-n-greet of some sort. Missed Ed Moore- great pieces in the Gallery. Didn't know Brad V. was there? Anyway, as a past organizer of a similar eventm my hat is off to the committee who put this together.
P.S.- I won the Jet Mini Lathe for the event evaluation!!
>For a first-time effort, I think it went quite well. I din't attend any rotations as I spent all my time in the vendor area. I liked Jimmy's approach during the critique session: each piece that is being critiqued is the best work that person is capable of....that always needs to be taken into consideration.
Dave, your piece made quite a splash!!
I met several wc regulars, and lots of old friends...
But that's OK cause I got to meet Ed Moore, took me till end of Sunday to track him down but I found him at the crit. He has awesome pieces, especially that Tulipwood goblet.
Congrats to all our friends who were praised by Jimmy Clewes and Mike Holusak for their incredible work. The IG was amazing. And the rotations were fantastic also. What a great weekend
It sure is flattering that I was even mentioned as a person who would be good to meet, but unfortunately I was working all weekend, trying to get my new business (solar & renewable energy) up on its wobbly legs.
The sad news is that all I've been able to turn in the past few months is the faux-marble column I posted with Queen Elizabeth of Great Britain the other day, a gavel for my town moderator, an ornament made from the trunk of our discarded Christmas tree, and a few tops so I can remember where the on-off switch is... :~( Now that I'm getting caught up, a little money is beginning to trickle in, and hopefully I will have some more time to play shop soon.
I'm hoping to attend a few turning meetings when I catch my breath a bit, and it will be a distinct pleasure to meet more of the gang here.
>Now this old memory is trying to remember the correct name. I guess that I had too much fun. I'm still in East Hampton and will attack the ride back to Virginia tomorrow.
>I also had a great time at the symposium, and am glad everyone else did to. Although I was not one of the organizers I was one of the volunteers. I think I will pass the posts from this thread on to the organizers. they are looking for as much feedback as possible.
>A big thank you to everyone who worked so hard to put this symposium together -- in a very short time, too. I thought it went off without almost a hiccup, and personally had a blast.
I met Don Orr, and Ian, who sat through my very first demonstration at that level. He had some very good constructive criticism, and I thank him for that. I know I met so many others, I just can't recall all your names.
I only wish I could attend more symposiums, but unfortunately, my pocketbook doesn't go that deep ;^(
The instant gallery was very inspirational. They are more than beautiful. They make me wonder how they did those. They give a goal for me to shoot for.
It also links the faces to some of the familiar names in various Forums.
One suggestion I have is:
My wife and I both attended; there was only 1 rotation sheet in our packet. There were no rotation schedule posted anywhere; not even in front of the demo rooms. My wife has the new sheet, I relied on the copy that I downloaded previously. I was not aware of the changes, I missed couple rotations of my first choice.
It is not that the second choices were less good; but I don't want to watch those whom I know they are going to demo in our Club later.
>Cool, Jorge, Congratulations ! Now those are some REAL bills to pay !
My business is ~35 miles north of Dartmouth, in the little town of Groton; basically across the river from Woodsville, NH. I'm only there from 9-2 on Saturdays, but if you're staying around Saturday afternoon or evening, or even Sunday, we could meet somewhere down there -- like the Brew Pub at the Norwich Inn, or the Seven Barrel Brewery in Lebanon (I think a pattern is forming...) Would also be fun to meet at a friend's place just up the hill from the Hanover green -- the very top of Trescott Hill, about 2 miles from the Hanover Inn (Trescott Street goes right by the front door of the Inn). Dustin Coates is a well-known turner in the area, and has quite an eclectic shop where he does everything from 1/8" minis all the way up to 4' diameter bowls -- and a great guy. That would be a fun little gathering.
Lemme know. Home 802-429-2154; store is 802-584-4977.
>Hey Ed, we met at Louisville and again at the Yankee symposium...perhaps you mistook me for Brad (?) After all, we have a lot in common....rugged good looks, we're both mesmerizing conversationalists, and superb turners, too. An easy mistake to make! Seriously though, I really enjoyed your platter, as did my wife.... It would be hard to improve upon it. Good talking with you again. We missed you, Brad!
>and I saw Gary Ljostad at the symposium. (Okay, the j's got me. And I don't know how to pronounce either name.)
Keith - I enjoyed seeing you again. Because we met in Louisville and corresponded about some design calculations, I did not regard you as a "new" friend, but rather as a valued established one.
By the way, your wife covets that zebrawood platter I had in the IG. Are you going to make her one or will I hear from you privately? ;^D
Mine's easy: "Veechee", rhymes w/peachy, as in peachy-keen; its Dutch, and can also be spelled Fietje. Now Gary's... hmmmm.... let's see... "L" + "j" + "o"... I know -- its "Smith", with all those vowels silent !
Those dog-gone Europeans -- couldn't spell worth a darn !