Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Stopping a crack on a mid-finished bowl

Posts

Stopping a crack on a mid-finished bowl

#1

Steve Kubien

Stopping a crack on a mid-finished bowl

Steve Kubien

>Hi everyone,

The maple bowl I am working on as developed a tiny crack. It has one coat of tung oil on it so far. Can I CA the crack even though the oil has not yet dried? Do I let the oil dry first (I suspect so). Will the CA work on an oiled surface once the oil is dry? Your help is appreciated greatly because I really like the shape of this bowl and I love the wood itself.

Thanks,

Steve Kubien

Ajax, Ontario

Re: Stopping a crack on a mid-finished bowl

#2

Re: Stopping a crack on a mid-finished bowl

adrien

>I usually work up a slurry with sandpaper and the wet finish. When the crack is filled, I put a drop of thin CA on it and sand some more. It usually dries a bit rough and needs further sanding, but the glue seems to fix the slurry in place. Don't use CA glue on unfinished wood, it prevents the finish from reaching the wood.

Re: Stopping a crack on a mid-finished bowl

#3

Re: Stopping a crack on a mid-finished bowl

Barbara Gill, Remlik VA

>I had to fix a little crack on a finished bowl. I put Claphams Salad bowl Finish around the crack to keep the CA from going anywhere except whhere I wanted it to go. The CA was easier to sand since it wasn'r spread out.

Re: Stopping a crack on a mid-finished bowl

#4

Steve Kubien

Thanks.

Steve Kubien

>I will try to combine these bits of advice and have at it tonight.

Thanks,

Steve Kubien

Ajax, Ontario