>Here is a box form that I have been working on. This is the first one in which I think I was able to get the shape and proportions right. You be the judge... I appreciate your comments and criticisms. This box is in Shedua and is 1 3/4" tall and 3 3/4" in diameter. Shedua is one of my favorite woods for boxes. It turns nicely, polishes nicely and usually has interesting grain and color.
>Mike, I really like the form on your box. It's a nice hand size. It invites you to pick it up and open it. Your choice of wood really sets it off nicely. Great piece all around.
>Sam, when turning boxes you start out with a stick of wood and turn a tenon on each end that you can hold in your 4-jaw chuck. Then you part the wood into two pieces, one for the lid and one for the body. I start by chucking the lid blank into my chuck and hollowing and finishing it on the inside. Then I do the same to the body blank. I turn a flange on the body that the lid is jam fit on to and then finish turning the outside of the lid and shaping the entire box. After that is done I reverse the body of the box and jam fit onto waste and turn the bottom.
>Thank you, Jim. This is one of my favorite woods and I love to turn it. Have you ever turned any for pens? I have but the scale is usually too small to appreciate the grain.
>I turned about thirty-five years ago. I called it a powder box because it resembled many of the powder boxes the ladies used in prior days. I'll try to post a picture of it sometime. My wife just loves that shape and I think your box is very appealing.
>Doug there is not a foot per se. There is a slight recess about the size of a quarter that gives me a place to sign and date the box. The bottom is curved to match the lid.
>That is truly an elegant shape. Thanks for the information and the posting of your work. I think you really have something there. It just begs to be picked up and held in the palm. No matter what size the hand, it looks like a perfect fit.