Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

1st Craft show this weekend

Posts

1st Craft show this weekend

#1

1st Craft show this weekend

David Breth

>It has been a while since I posted anything, but that is because I've been in preparation mode. This weekend I'll be doing my first craft show. Putting kids to bed means I can't do anything until 9pm, so I've been up until 3am pretty much every night for the past two weeks.

Yeah, I could have started earlier, but the Sabres will still in the Stanley Cup Playoffs, and I couldn't be expected to do anything while that was going on.

So, tomorrow is the big day, when I replace hearing attaboys from friends and family who get gifts with "yeah, I guess they are ok"'s from strangers with cash. I alternate between the fantasy that I might sell 90% of what is there and the fearsom nightmare that I'll barely cover the cost of the $50 table. In truth, I have a pretty good feeling about what I'm doing and my approach. I know my place - I'm not at the level of many on this site, but I make a decent bowl, and people do respond to the novelty of turned items.

Here are some of the things i've done that I think are worthwhile:

1) Made up a 3-ring binder that shows how you go from tree to bowl - very brief, entitled "How'd he do that?".

2) Made up a 3-ring binder with examples of my work, entitled "Examples of my work, from coin banks to toy boxes and beyond", in the hopes that somebody might want me to make something for them.

3) I got business cards, the "freebie..." variety off the internet. Each turned item will have the card (upside down) in front of it, with a brief description and the price. I figure that way my card pretty much goes home with any recipients.

4) I made about 80 little cars, matchbox size, as a (hopefully) bread and butter sale item. 4 styles of vehicle, 6 paint colors, all brightly colored. Hope to sell them of course, but also hope the color will lure folks in.

5) Kept it local, and am doing a moderate-level show, meaning this isn't a show that will draw vendors from all corners of the earth, nor is it one that will draw every guy who can make a pig out of erasers and thumbtacks. I wouldn't want to have to compete with either.

7) Borrowed a canopy tent from a friend, and garbage-picked two card tables to supplement the 6-foot tables I borrowed.

8) Made good use of the dollar store for stuff like baskets and tablecloth clips. Used the clearance area at Jo-Ann Fabrics for table cloth material.

9) Made up a few little signs, such as "please handle wooden items with clean, dry, careful hands." We'll see how that goes. I'll keep the delicates and pricier items away from the edge of the table...

Oh - did I mention that that the weather calls for thunderstorms on both days? That ought to bring people to the outdoor show.

David B.

Re: 1st Craft show this weekend

#2

Re: 1st Craft show this weekend

Don in Central Illinois

>Good luck. Let us know how it went. I like the idea of the notebook on 'how'd he do that'. Nice touch.

Re: 1st Craft show this weekend

#3

Brad Vietje

Re: 1st Craft show this weekend

Brad Vietje

>David,

I agree the binders and photos are a good idea. You can create a more interesting display by making it look less like a tabletop (all in one plane) by finding "risers" of differing heights on which to display pieces. I was inspired by Jennifer's booth pics (over a year ago...) with short sonotube (?) columns of different heights used as bases for round tops. I used a few different sizes of ivory-colored wastebaskets, turned upside-down, and topped with polished stone floor tiles I got at Home Depot -- these really contrasted nicely with the polished wood.

I'd also caution about wind, having watched a few lightweight turnings follow my entire 10 x 10 booth as it bounced and tumbled across a parking lot last summer! Anchor, spike, and weight down those legs, and I suggest a cheap-o drop cloth or length of canvas to use as sides to keep out wind and rain. I found a natural-looking unbleached canvas drop cloth at a hardware store with grommets in the corners -- I think it was 10' by 25', and I was able to attach it around two sides of the canopy with twine and cool little bungee cords with alligator-like gripping jaws at one end and a plastic ball on the other -- they came in a 4-pack at the same hardware store.

Wet hands aren't so bad if you have oil & beeswax sorta soft finishes on mainly salad bowls, but they can really mess up a high-gloss piece that you've carefully sanded to 3 million or so with micro-mesh and buffed for a lifetime or two... Displaying outdoors in the rain can be pretty tough ! I recommend making a few towels handy for hand-drying if the drops are falling, and having a place to air dry the used ones for use the next day -- this came in really handy a few times for me. Don't forget that damp conditions and temperature changes can cause condensation on polished surfaces, so I also learned to buff pieces a little with a dry cloth or paper towels throughout the day -- I also decided against any final buffing with paste waxes -- just too vulnerable to smears and fingerprints and such, especially if hot and/or wet out.

Best of luck, and have a great time !

Brad Vietje

Newbury, VT

Re: 1st Craft show this weekend

#4

Re: 1st Craft show this weekend

robo hippy

>Do go to the limit on being prepared for weather. Spikes (driven at an angle, not straight in, weights, sides, front (clear plastic and/or an awning, and a sturdy tent (push off all puddles on top), and hope it doesn't rain at night (I have seen tents collapse). Have fun, take your own bowl to the food booths, have change, do some trading.

robo hippy

Re: 1st Craft show this weekend

#5

Re: 1st Craft show this weekend

Dale Cook

>Good luck on the show. Another tip for your tent is to pick up some plastic coated spring clamps to clamp the top all the way around to the side walls. The wind goes up the side wall and can take the roof off, I know this from experience.Good luck!

Re: 1st Craft show this weekend

#6

Re: 1st Craft show this weekend

David Breth

>Brad - your suggestions make me feel better:

For "levels" I've got a few plate-display stands, and a few flat bottomed baskets to turn upside down. So, I'll have elevation, but nothing precarious in wind. This was the poor man's method - I've seen other methods that are really cool, but I'm going to wait and see how this goes.

In addition to the card tables God provided, he also provided curbside weights yesterday that I will use to help secure the canopy. The canopy actually has four sides, so I can zip down if I need to.

I'm planning on bringing towels/wipe rags/paper towels for the eventualities you mentioned.

Thank you very much for your suggestions!

David B.

Re: 1st Craft show this weekend

#7

Brad Vietje

One other thing...

Brad Vietje

>It also helps to have a few small flattened boxes and a roll of packing tape, something in which to wrap a sold piece, and some bags -- even a few plastic shopping bags for sales on rainy days. I don't recommend wrapping things in newspapers -- those inks will leave you with reversed text and photos on the light colored woods even on a good day, and a real mess if they get wet !

Safe spinning,

BV

Re: 1st Craft show this weekend

#8

Re: 1st Craft show this weekend

Chip in Plano

>Varying heights is a must. Some of my riser blocks were wood blanks. People stopped to hear the 'ugly duckling' story. Here's what it looked like before and here's the finished product. Ugly....beautiful!!

I brought extra plate stands, too. Flipped the other way and they can elevate and tilt bowls for display, too. I went for a black backdrop. It was sort of a velour texture. It made for an elegant setup complimenting the raw beauty of the turned pieces.

Keep a quality, dustless rubbing cloth to keep the bowls clean and shiny....people have dirty hands...and kids like to touch everything.

At my first craftshow, I got an invitation to another one. I shared a booth with my 72 yr old expert basketweaving mother. She got an invitation, too. We didn't go because the booth cost was too high and the other vendors weren't a good compliment to our true craftwork.

Re: 1st Craft show this weekend

#9

Re: 1st Craft show this weekend

Jimiles-Charlotte, NC

>David:

Two suggestions: Judge your success for your first show by what you go home with in your head ( new knowlege, experience) not by what you go home with in you pocket( Money ) Second: Spend time talking to other vendors - how do they do it, What are the good shows around here, What shows to avoid, Look for marketing and sales ideas. I am fond of saying turning wood and selling wood are like the difference in football and synchronized swimming. The biggeast problem most people have is in moving from making what I like to make to learning what it is you can make that will sell. Good Luck!